22
Australian & New Zealand Product Warranty Statements of Standard Warranty Conditions
Australian Customers
Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major
failure.
New Zealand Customers
Nothing herein contained shall be construed in any way as
excluding or limiting your rights under the Consumer Guarantee
Act 1993.
Our Warranty
This product is also covered by the manufacturer’s warranty set
out in this document (Our Warranty).
Our Warranty is for a period of twenty four (24) months from the
date of purchase and for refrigeration appliances will have an
additional thirty six (36) months after the first twenty four (24)
months on the Sealed System (PARTS only) Compressor &
condenser etc. The labour cost to replace these parts is the
responsibility of the customer. This is in addition to (and does
not exclude, restrict or modify) any rights or remedies to which
you may already be entitled under the Australian Consumer Law
or the New Zealand Consumer Guarantee Act 1993 relating to
this product. Our Warranty (which is subject to the conditions
below) covers rectification free of charge of any fault arising from
defective materials or components, or faulty workmanship. The
product will be repaired or replaced at the option of Omega, and
all costs of installation, removal, cartage, freight travelling
expenses and insurance are to be paid by the customer.
Our Warranty is subject to the following conditions:
1. That the purchaser contact Omega prior to any product
repair.
2. That the purchaser carefully follows all instructions provided
with the product and complies with all relevant electrical &
plumbing regulations in their State when installing the
product.
3. That the purchaser carefully follows the instructions
provided in the owner’s handbook relating to the proper use
and care of the product and does not use the product for
any purpose other than the DOMESTIC use for which it has
been designed. If the appliance is used in commercial
applications or for rental purposes, Our Warranty is limited
to a warranty of Twelve (12) months covering all parts with
Three (3) months on any labour cost of service or repair.
Service Area
The provision of service under Our Warranty is limited by the
boundary / territory area of the nearest service centre. Travelling
cost incurred for service outside this area is not covered by Our
Warranty
and service will incur commercial cost to be paid by the
customer regulated by the number of kilometres travelled
beyond the service area. These costs will be disclosed to you for
acceptance by you prior to your claim being processed.
Microwave ovens must be returned to your nearest Authorised
Service Centre for repair as they are a carry in serviceable
appliance.
What is Covered by our Warranty
During the warranty period, Omega or its authorised Service
Centre will, at no extra charge, if your appliance is readily
accessible without the need of special equipment and subject to
the terms and conditions of this warranty, repair or replace any
parts which it considers defective.
What is not Covered by our Warranty
1. Products installed damaged or incomplete or not in
compliance with the relevant electrical & plumbing
regulations in their State.
2. Normal wear and tear e.g. cleaning, light globes, filters etc.
3. Failure resulting from power surges and electrical storms.
4. Insect or vermin infestation.
5. Unauthorised repairs or use of non-genuine Omega parts.
6. Any failure caused by the product not being used in
accordance with the instruction and the installation manual
provided with the product.
7. Misuse or abuse, including failure to properly maintain or
service.
8. The clearing of blockages in pumps and hoses.
9. Damage which occurs during delivery or installation.
10. Claims to product surface coating due to liquid or solid
spill-overs, accidental damage or damage caused from
cleaning products not recommended by Omega.
How to Claim Our Warranty
While registering your warranty is not a requirement, for peace
of mind you can register your warranty at
omegaappliances.com.au.
To make a claim under Warranty you will need to contact
Omega in Australia or New Zealand by using the contact details
below.
If you are contacting Omega regarding any warranty claims and
spare parts inquiries, please make sure you have the following
information on hand:
1. Product Name/Model Number
2. Serial Number/s
3. Purchase Date (as per invoice or proof of purchase)
4. Purchased From
5. Warranty Registration Number (if registered)
Contact Us Australia
Omega is a division of Shriro Australia Pty Ltd
Phone: 1300 739 033
Email: [email protected]
Contact Us New Zealand
Omega is a division of Monaco Corporation (member of Shriro)
Phone: 09 415 6000
Email: [email protected]
22
Australian & New Zealand Product Warranty Statements of Standard Warranty Conditions
Australian Customers
Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major
failure.
New Zealand Customers
Nothing herein contained shall be construed in any way as
excluding or limiting your rights under the Consumer Guarantee
Act 1993.
Our Warranty
This product is also covered by the manufacturer’s warranty set
out in this document (Our Warranty).
Our Warranty is for a period of twenty four (24) months from the
date of purchase and for refrigeration appliances will have an
additional thirty six (36) months after the first twenty four (24)
months on the Sealed System (PARTS only) Compressor &
condenser etc. The labour cost to replace these parts is the
responsibility of the customer. This is in addition to (and does
not exclude, restrict or modify) any rights or remedies to which
you may already be entitled under the Australian Consumer Law
or the New Zealand Consumer Guarantee Act 1993 relating to
this product. Our Warranty (which is subject to the conditions
below) covers rectification free of charge of any fault arising from
defective materials or components, or faulty workmanship. The
product will be repaired or replaced at the option of Omega, and
all costs of installation, removal, cartage, freight travelling
expenses and insurance are to be paid by the customer.
Our Warranty is subject to the following conditions:
1. That the purchaser contact Omega prior to any product
repair.
2. That the purchaser carefully follows all instructions provided
with the product and complies with all relevant electrical &
plumbing regulations in their State when installing the
product.
3. That the purchaser carefully follows the instructions
provided in the owner’s handbook relating to the proper use
and care of the product and does not use the product for
any purpose other than the DOMESTIC use for which it has
been designed. If the appliance is used in commercial
applications or for rental purposes, Our Warranty is limited
to a warranty of Twelve (12) months covering all parts with
Three (3) months on any labour cost of service or repair.
Service Area
The provision of service under Our Warranty is limited by the
boundary / territory area of the nearest service centre. Travelling
cost incurred for service outside this area is not covered by Our
Warranty
and service will incur commercial cost to be paid by the
customer regulated by the number of kilometres travelled
beyond the service area. These costs will be disclosed to you for
acceptance by you prior to your claim being processed.
Microwave ovens must be returned to your nearest Authorised
Service Centre for repair as they are a carry in serviceable
appliance.
What is Covered by our Warranty
During the warranty period, Omega or its authorised Service
Centre will, at no extra charge, if your appliance is readily
accessible without the need of special equipment and subject to
the terms and conditions of this warranty, repair or replace any
parts which it considers defective.
What is not Covered by our Warranty
1. Products installed damaged or incomplete or not in
compliance with the relevant electrical & plumbing
regulations in their State.
2. Normal wear and tear e.g. cleaning, light globes, filters etc.
3. Failure resulting from power surges and electrical storms.
4. Insect or vermin infestation.
5. Unauthorised repairs or use of non-genuine Omega parts.
6. Any failure caused by the product not being used in
accordance with the instruction and the installation manual
provided with the product.
7. Misuse or abuse, including failure to properly maintain or
service.
8. The clearing of blockages in pumps and hoses.
9. Damage which occurs during delivery or installation.
10. Claims to product surface coating due to liquid or solid
spill-overs, accidental damage or damage caused from
cleaning products not recommended by Omega.
How to Claim Our Warranty
While registering your warranty is not a requirement, for peace
of mind you can register your warranty at
omegaappliances.com.au.
To make a claim under Warranty you will need to contact
Omega in Australia or New Zealand by using the contact details
below.
If you are contacting Omega regarding any warranty claims and
spare parts inquiries, please make sure you have the following
information on hand:
1. Product Name/Model Number
2. Serial Number/s
3. Purchase Date (as per invoice or proof of purchase)
4. Purchased From
5. Warranty Registration Number (if registered)
Contact Us Australia
Omega is a division of Shriro Australia Pty Ltd
Phone: 1300 739 033
Email: [email protected]
Contact Us New Zealand
Omega is a division of Monaco Corporation (member of Shriro)
Phone: 09 415 6000
Email: [email protected]
8
3. When the heating zone is in double loop working mode,the double loop
indicator shows ” ”.
4. You can select the size of the heating zone according to the size of the pot.
1 2
1200W 1800W
1000W 2200W
4
3
Heating zone
Power
Inner double
1200W
Timer function
Cooking timer
First select the cooking zone by press the “-” or “+” of the relevant heating zone;
the cooking zone display flashes. Then adjust the timer by pressing the “-” or “+”
of the timer. The timer is confirmed after the timer indicator flashes for 5
seconds. A red dot is displayed at the corresponding cooking zone indicator,
indicating a cooking timer has been set for the cooking zone. When a cooking
timer expires, the corresponding cooking zone will switch off automatically.
Note:Cooking timer only works for one cooking zone at the same time.
Minute Reminder
Timer can be used as a minute reminder.
Press the “+”or “-” of the timer and the timer indicator flashes “00”. Adjust the
timer by pressing the “+”or “-” of the timer. The timer is set when the timer
indicator stops flashing 5 seconds after the last action, and the minute reminder
starts. When the timer has finished, the buzzer will beep for 30 seconds and the
timer indicator shows “--”. The cooking zones are not affected by the minute
reminder.
Timer cancellation
Press the “+” and “-” of the timer simultaneously. The timer is canceled and the
timer indicator shows “--”.
Lock Function
To ensure the safety of children, the hob is fitted with a lock device
Activating the lock function
Press the “ ”,the hob then goes into lock mode, the timer shows “
” and
the rest of the keys are disabled except the ON/OFF keys .
Deactivating the lock function
Hold down the “ ” for several seconds and the hob will return to normal
working.
The power of each cooking zone is as follows:
omegaappliances
omegaappliances_aus
6
Operating Instructions
3. When the heating zone is in double loop working mode,the double loop
indicator shows ” ”.
4. You can select the size of the heating zone according to the size of the pot.
1 2
1200W 1800W
1000W 2200W
4
3
Heating zone
Power
Inner double
1200W
Timer function
Cooking timer
First select the cooking zone by press the “-” or “+” of the relevant heating zone;
the cooking zone display flashes. Then adjust the timer by pressing the “-” or “+”
of the timer. The timer is confirmed after the timer indicator flashes for 5
seconds. A red dot is displayed at the corresponding cooking zone indicator,
indicating a cooking timer has been set for the cooking zone. When a cooking
timer expires, the corresponding cooking zone will switch off automatically.
Note:Cooking timer only works for one cooking zone at the same time.
Minute Reminder
Timer can be used as a minute reminder.
Press the “+”or “-” of the timer and the timer indicator flashes “00”. Adjust the
timer by pressing the “+”or “-” of the timer. The timer is set when the timer
indicator stops flashing 5 seconds after the last action, and the minute reminder
starts. When the timer has finished, the buzzer will beep for 30 seconds and the
timer indicator shows “--”. The cooking zones are not affected by the minute
reminder.
Timer cancellation
Press the “+” and “-” of the timer simultaneously. The timer is canceled and the
timer indicator shows “--”.
Lock Function
To ensure the safety of children, the hob is fitted with a lock device
Activating the lock function
Press the “ ”,the hob then goes into lock mode, the timer shows “
” and
the rest of the keys are disabled except the ON/OFF keys .
Deactivating the lock function
Hold down the “ ” for several seconds and the hob will return to normal
working.
The power of each cooking zone is as follows:
omegaappliances
omegaappliances_aus
6
3. When the heating zone is in double loop working mode,the double loop
indicator shows ” ”.
4. You can select the size of the heating zone according to the size of the pot.
1 2
1200W 1800W
1000W 2200W
4
3
Heating zone
Power
Inner double
1200W
Timer function
Cooking timer
First select the cooking zone by press the “-” or “+” of the relevant heating zone;
the cooking zone display flashes. Then adjust the timer by pressing the “-” or “+”
of the timer. The timer is confirmed after the timer indicator flashes for 5
seconds. A red dot is displayed at the corresponding cooking zone indicator,
indicating a cooking timer has been set for the cooking zone. When a cooking
timer expires, the corresponding cooking zone will switch off automatically.
Note:Cooking timer only works for one cooking zone at the same time.
Minute Reminder
Timer can be used as a minute reminder.
Press the “+”or “-” of the timer and the timer indicator flashes “00”. Adjust the
timer by pressing the “+”or “-” of the timer. The timer is set when the timer
indicator stops flashing 5 seconds after the last action, and the minute reminder
starts. When the timer has finished, the buzzer will beep for 30 seconds and the
timer indicator shows “--”. The cooking zones are not affected by the minute
reminder.
Timer cancellation
Press the “+” and “-” of the timer simultaneously. The timer is canceled and the
timer indicator shows “--”.
Lock Function
To ensure the safety of children, the hob is fitted with a lock device
Activating the lock function
Press the “ ”,the hob then goes into lock mode, the timer shows “
” and
the rest of the keys are disabled except the ON/OFF keys .
Deactivating the lock function
Hold down the “ ” for several seconds and the hob will return to normal
working.
The power of each cooking zone is as follows:
omegaappliances
omegaappliances_aus
6
Schematic diagram of the control panel
Instructions for Use
Note:
1. When the “
” key is pressed, the hob returns to standby mode if no other
Preparation before using
When the power is switched on, the buzzer will sound once and all the
indicators will come on for one second and go out. The hob is now in standby
mode. Place the pan in the centre of the cooking zone.
Press the “ ” key to turn on the hob,then the power indicators show “-” and
the timer indicators shows “--”,the hob is now ready for heating. Then press
the “ ”or “ ” key for the corresponding cooking zone where there is a pan on
it, the relevant hotplate will start heating. Its corresponding cooking zone
indicator flashes “5” five seconds,when the other indicators show “-”. Select the
power level by pressing the “ ” or “ ” key for the relevant hotplate.
operation is carried out within one minute.
2. Every cooking zone is independent of each other.
Double zone function
The hob is fitted with double zone
Activate the double zone
If you want to use larger heating zone, press the “ ” when the hob is
in working mode.
Deactivate the double zone
Press the “ ” when the hob is working with double zone.
Note:
1. This function is available only in the right rear heating zone.
2. You can select the function from level 1 to level 9.
Lock
Timer regulating key
On/Off
Double zone
Power regulating key
omegaappliances
omegaappliances_aus
5
Summary of Contents for OCC70TZ
Page 16: ...1...
