5
INSTALLATION
In order to avoid accidentally touching the hot underside of the cooktop, or getting an unexpected electric shock, it
is necessary to put a wooden insert, fixed by screws, at a minimum distance of 50mm from the bottom of the
cooktop.
There are ventilation holes around outside of the cooktop. Ensure that these holes are not blocked by the bench
when you install the cooktop.
Be aware that any glue used on the bench must be resistant to a minimum temperature of 150°C.
The rear wall, adjacent and surrounding surfaces must therefore be able to withstand a temperature of 90°C.
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the controls
protruding from the hob.
Fix the hob to the bench by screwing the four brackets to the bottom of the cooktop (see image) after installation.
A
B
C
D
Screw Bracket Screw hole Base
Adjust the bracket position to suit for different bench thicknesses.
The brackets should not touch the bench after installation (see image above).
