Omega OBOS605B Instruction Manual Download

Page: 5 / 20

Important Safety Warnings

IMPORTANT: Read the assembly instruction section and safety precautions of this booklet carefully before removing the

contents of this carton.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction

concerning the use of the appliance by a person responsible for their safety. Children should be supervised to

ensure that they do not play with the appliance.

In certain circumstances electrical appliances may be a danger hazard.

Do not place heavy objects in or on these appliances, or use for storage, or let children play or swing from the

door. These appliances are designed for cooking food only.

This appliance is designed for domestic household use only and for the cooking of domestic food products. Use

as a commercial appliance will void the warranty. It should not be used in a marine environment or outdoors.

This appliance is supplied with a 10-amp plug.

If the electrical supply cord is damaged, either when being installed or after installation, it must be replaced by

the manufacturer, its service centre or similarly qualified persons in order to prevent a hazard.

The electrical connection must be accessible after installation. The appliance must be electrically isolated

before any maintenance can be performed, which includes changing a lamp.

Electrical connection must be made as per local wiring rules and regulations. Do not disconnect the appliance

with wet hands or bare feet, and do not disconnect the power cord with extreme force.

Always grasp the oven door in the centre of the handle as the areas around the door edges may be hot due to

the escape of hot air.

10.

Ensure that the kitchen is well ventilated or mechanical ventilation is in use while cooking in this appliance.

11.

Do not store or use flammable materials or aerosols near the oven. Items made from aluminium, plastic or

plastic film should also be kept away from the appliance, as they may fuse to the surface.

12.

Never line the oven bottom with aluminium foil, as the consequent accumulation of heat could compromise the

cooking and even damage the enamel.

13.

WARNING - The oven will become hot during and directly after use. Do not touch any components during this

time, as they may be hot and can cause burns. Do not touch the heating elements inside the oven to avoid

burns. Children should be kept away. Use heat resistant cooking gloves where-ever possible when moving food

and cooking utensils in and out of the oven.

14.

Cleaning may only be commenced on the appliance once it has cooled down (best slightly warm). The

appliance should be disconnected from the power outlet or turned off at your isolation switch before

commencing any cleaning process. Do not use a steam jet or any other high-pressure cleaning equipment to

clean the appliance. Follow oven cleaner directions if these are being used.

15.

Wash all accessories in hot soapy water or in a dishwasher, wipe dry with a paper or cloth towel. If you use your

oven for an extended period of time, condensation may form. Dry it using a soft dry cloth.

16.

When the appliance is not being used, the knobs must be kept in the ‘OFF’ position.

17.

Where this appliance is installed in a caravan, it shall NOT be used as a space heater.

18.

Do not modify this appliance.

19.

Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass as it can scratch the

surface, which may result in the glass shattering. Clean the glass door using warm damp cloth and dry it with a

soft cloth.

20.

All cabinetry and materials used in the installation must be able to withstand a minimum temperature of 50°C

above the ambient temperature of the room it is located in, whilst in use. Certain types of vinyl or laminate

kitchen furniture are particularly prone to heat damage or discolouration at temperatures outside the guidelines

given above. Any damage caused by the appliance being installed without adhering to the temperature limits

set out above will be the liability of the owner.

21.

This appliance must be correctly installed by a suitably qualified person, strictly in accordance with the

manufacturer’s instructions. Please see the specific section of this booklet that refers to installation.

22.

The appliance must be installed and put in operation by an authorised technician under the conditions provided

by the manufacturer in this manual. The manufacturer cannot be held responsible for any damage that might

occur due to faulty installation.

23.

The values indicated on the printed documents found on the product are values obtained in laboratory

environment according to relevant standards. These values may vary according to the usage and environment

conditions of product.

Appliance Details

Electrical Details

Model

OBOS605B

Voltage Rating

220-240V ~50Hz

Power Rating

1970-2340W

This information can be found on the rating plate (data label) affixed to the inside of the door jamb.
Dimensions

LENGTH (mm)

WIDTH (mm)

HEIGHT (mm)

595

540

Electical Connection

LOCAL AUTHORITY REQUIREMENTS
Installation is only permitted by a licensed electrician and carried out according to instructions

provided by the manufacturer. Incorrect installation might cause harm and damage which the

manufacturer accepts no responsibility.
ELECTRICAL INSTALLATION FOR THE LICENSED ELECTRICIAN

This oven must be connected to a 220-240V 50Hz power supply. It is earthed via the cord and 10A plug.

Before carrying out the connection to the power supply, the voltage rating of the appliance (stamped on the

appliance identification plate) must be checked for correspondence to the available mains supply voltage,

and the mains electric wiring should be suitable for the oven’s power rating (also indicated on the appliance

identification plate);

The switched outlet must be connected to a suitable earth wiring, in conformity to current safety regulations.

This appliance must be plugged into a 10A switched outlet. It should not be located above the appliance

and no more than 1.25m away from it. The power supply cord must not touch against any hot surfaces and

must be placed so that its temperature does not exceed 75°C at any point along its length.

After having installed the appliance, the switched outlet must always be in an accessible position.

NOTE: For connections to the mains power supply, never use adapters, reductions or multiple power points

as these may overheat and catch fire.

The mains terminal block is located on the back of the oven and the terminals are accessible by opening

the terminal block cover. Note: The terminal cover should not be opened when the mains power is still

connected to the appliance and never by an unauthorized person.

The electrical safety of this appliance can only be guaranteed if the oven is correctly and efficiently earthed.

The manufacturer declines all responsibility for damage resulting from an installation which has not been

earthed correctly.

The use of adapters, multiple sockets and/or extensions, is not allowed.

Cleaning

NOTE: Cleaning and maintenance operations must only be carried out when the oven is cool.

The appliance should be disconnected from the power outlet or turned off at your isolation

switch before commencing any cleaning process.

Cleaning the oven exterior
Before starting to clean your oven, be sure that all control buttons are off and your appliance has cooled off.

Unplug the appliance.

Do not use cleaning materials containing particles that might scratch the enamelled and painted parts of

your oven. Use cream cleaners or liquid cleaners, which do not contain particles. As these cleaners may

damage the surfaces, do not use caustic creams, abrasive cleaning powders, rough wire wool or hard tools.

In the event of any excess liquids spilling over your oven surface during cleaning, clean up immediately so

as to prevent possible damage to the enamel or metal surface. Do not use steam cleaners for cleaning the

oven.
Cleaning the interior of the oven
Make sure to unplug the oven before starting to clean it. You will obtain best results if you clean the oven

interior while the oven is slightly warm (the oven should not be operating). Wipe your oven with a soft piece

of cloth (e.g. dish cloth) dampened with warm soapy water after each use, rinse cloth in warm water then

wipe oven again and then finish by wiping with a dry cloth. For a complete cleaning process, use dry and

powder type oven cleaners, following the oven cleaning product’s instructions.

Troubleshooting

If the oven does not operate:

•

The oven may be unplugged from the power source or switched off at the power source.

•

The household fuse has blown or household power supply is off.

•

The Timer (if available) may not set correctly.

If the oven does not heat:

•

The heat may not be set correctly with the oven’s temperature setting.

If the interior lighting lamp does not light:

•

The lamps are defective. If they are defective, you can change them following the instructions

within this manual.

Cooking (if lower-upper part does not cook equally):

•

Control the shelf locations, cooking period and heat values according to the manual.

Unit smoking when first used:

•

This is a result of protective oils being removed and is to be expected with a first use.

Oven fan is still running even though knobs in off position:

•

The cooling fan has activated to cool down the control; this is normal and may stay on for some

time.

Clock Flashing on Display

•

Power failure or interruption

If you have any further problems with your product, please call your Authorised Service Centre.