12
Take out the sealing strip from accessory bag, and press it in the gap between the cabinet and the
refrigerator. Installation is completed.
Remove the decorative cover on the left side of the beam in the refrigerator and take out the middle beam
fixing block, screws and plastic inserts in the attachment. Then insert the plastic inserts into two upper holes of
the middle beam (or the lower holes), and then fix the middle beam fixing block to two lower holes (or the
upper holes) of the middle beam with screws, When the screw is half tightened, move the fixing block to the
cabinet and tighten the screws. Finally, tighten the fixing block on the cabinet with the small screws. The
installation is completed. (This item is optional for the middle beam fixing block)
•
WARNING: Power plug or switch must be accessible after installation.
