Configure the Computer’s TCP/IP settings as follows.
Make sure that each computer on the dedicated network has a unique
IP address. Make sure that the IP address of the acquisition device is also
unique. The computer and the device cannot use the same IP address.
Internet Protocol (TCP/IP) Properties
6.
Select the “Use the following IP Address” radio button.
7.
Set the IP address field to 10.0.0.x where x is some number from 1 to 255.
Make sure that each computer on the dedicated network has a unique
IP address.
8.
Set the Subnet mask to 255.0.0.0. Note that the remaining fields can be left
unchanged.
6-8 Configuring the System for Operation
898195
DaqLab/2000 Series & DaqScan/2000 Series
Get user manuals:
Summary of Contents for O-DAQSCAN-2000 Series
Page 12: ...1 6 Daq Systems 949595 DaqScan 2000 Series Get user manuals See SafeManuals com...
Page 16: ...2 4 Device Overviews 898095 DaqLab 2000 Series Get user manuals See SafeManuals com...
Page 20: ...3 4 Block Diagram 947495 DaqScan 2000 Series Get user manuals See SafeManuals com...
Page 56: ...9 2 Calibration 948695 Daqscan 2000 Series Get user manuals See SafeManuals com...
