17
DUring THE OPEraTiOn, DO nOT aTTEMPT TO MOVE THE BaSE, DiSaSSEMBLE
THE BOWL SET Or ParTS anD TrY TO LOCK THEM.
It may cause an injury or a failure. Any act of event needed, switch off first
and unplug the power cord.
WHEn USing THE aPPLianCE, BE CarEFUL FOr a nECKTiE, LOng nECKLaCE,
SCarF ETC. nOT TO BE EnTangLED inTO FEEDing TUBE.
It may cause an injury, a failure or a breakage.
PLaCE THE aPPLianCE On a FLaT anD STaBLE SUrFaCE.
It may cause an injury or a failure.
DO nOT OPEraTE THE aPPLianCE FOr MOrE THan 30 MinUTES aT a TiME.
It may cause a motor failure due to overheating. Cool it down sufficiently for
5 minutes and operate it again.
WHEn PLaCing ingrEDiEnTS inTO THE FEEDing TUBE, OnLY USE THE
PUSHEr PrOViDED.
It may cause an injury or a failure.
DO nOT aLLOW a SEVErE SHOCK TO THE aPPLianCE Or DrOP iT.
It may cause an electric shock, a fire or damage
iF THE aPPLianCE giVES OFF an UnPLEaSanT SMELL Or EXCESSiVE HEaTing,
SMOKE, STOP USing iMMEDiaTELY anD COnTaCT THE LOCaL CUSTOMEr
CarE CEnTEr.
When using a new appliance, it gives off a smell and the smell disappears naturally
over time.
aLWaYS UnPLUg THE aPPLianCE aFTEr USE.
WHEn UnPLUgging THE POWEr COrD, MaKE SUrE TO HOLD THE POWEr COrD.
If holding the wire to unplug, it may cause an electric shock or a fire.
DO nOT WaSH aT HigH TEMPEraTUrES OF 176°F (80°C) Or MOrE.
DO nOT PUT THE aPPLianCE in a DiSHWaSHEr, a DrYEr Or a MiCrOWaVE ETC.
It may cause a failure or parts deformation.
THE aPPLianCE WEigHS aBOUT 13.2 LB (6 Kg). WHEn MOVing THE aPPLianCE,
EnSUrE TO MOVE iT HOLDing griPS TigHTLY aT THE BaSE BOTTOM WiTH
BOTH HanDS.
If attempting to hold bowl or the edge of the base, the base falls causing an
injury or a failure.
30minute
Summary of Contents for NC800
