Omega Mugello 2525, User Manual

Page: 28 / 68

6
EN
6
2. EXPLANATION OF SYMBOLS ON THE MACHINE
The port to refuel ”MIX GASOLINE”
Position: Fuel cap
The screw under the “H” stamp is
The High-speed adjustment screw.
The screw under the “L” stamp is The
Slow-speed adjustment screw.
The screw at the left of the “T”
stamp is the ldle adjustment screw.
Position: Left side of the rear handle.
Shows the directions that the chain
brake is released (white arrow) and
Activated (black arrow).
Position: Front of the chain cover.
The port to top up chain oil.
Position:
Oil cap
Setting the switch to the “O” posi-
tion, the engine stops immediately.
Position: Rear-left of the unit
Starting the engine. If you pull out
the choke knob (at the back-right of
the rear handle) to the point of the
arrow, you can set the starting mode
as follows:
• First-stage position-starting mode
when the engine is warm.
• Second-stage position-starting
mode when the engine is cold.
Position:
Upper-right of the air
cleaner cover.
FOR SAFE OPERATION AND MAINTENANCE, SYMBOLS ARE CARVED IN RELIEF ON
THE MACHINE. ACCORDING TO THESE INDICATIONS, PLEASE BE CAREFUL NOT TO
MAKE ANY MISTAKE.
+
H
L
T