http://www.omega.com
e-mail: [email protected]
®
User’s Guide
LVCN700 Series
Multi-Point Ultrasonic Level Switch
WARRANTY
/DISCLAIMER
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a
period of
13 months
from date of purchase. OM
EGA Wa
rranty adds an additional one (1) month grace
period to the normal
one (1) year product warranty
to cover handling and shipping time. This ensures
that OMEGA’s
customers receive maximum coverage on each product.
If the unit should malfunction, it must be returned to the factory for evaluation. OMEGA
’s
Customer Service
Department will issue an Authorized Return (AR) number immediately upon phone or written request. Upon
examination by OMEGA,
if
the unit is found to be defective it will be repaired or replaced at no charge.
OMEGA’s
WARRANTY does not apply to defects resulting from any action of the purchaser
, including but not
limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or unautho-
rized modification. This WARRANTY is VOID if the unit shows evidence of having been tampered with or
shows evidence of being damaged as a result of excessive corrosion; or current, heat, moisture or vibration;
improper specification; misapplication; misuse or other operating conditions outside of OMEGA
’s
control.
Components which wear are not warranted, including but not limited to contact points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its various products. However , OMEGA neither
assumes responsibility for any omissions or errors nor assumes liability for any damages that result
from the use of its products in accordance with information provided by OMEGA, either verbal or writ-
ten. OMEGA warrants only that the parts manufactured by it will be as specified and free of defects.
OMEGA MAKES NO OTHER WARRANTIES OR REPRESENT
A T
IONS OF ANY KIND WHA TS0EVER,
EXPRESSED OR IMPLIED, EXCEPT THA T
OF TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY
WARRANTY OF MERCHANT
ABILITY AND FITNESS FOR A PA
RTICULAR PURPOSE ARE HEREBY DIS-
CLAIMED. LIMITA
TION OF LIABILITY
: The remedies of purchaser set forth herein are exclusive and the
total liability of OMEGA with respect to this order , whether based on contract, warranty
, negligence,
indemnification, strict liability or otherwise, shall not exceed the purchase price of the component
upon which liability is based. In no event shall OMEGA be liable for consequential, incidental or spe-
cial damages.
CONDITIONS: Equipment sold by OMEGA
is n
ot i
ntended to be used, nor shall it be used: (1) as a “Basic
Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical
applications or used on humans. Should any Product(s) be used in or with any nuclear installation or activity,
medical application, used on humans, or misused in any way, OMEGA
assumes no responsibility as set forth
in our basic WA
RRANTY/
DISCLAIMER language, and additionally, purchaser will indemnify
OMEGAa
nd
ho
ld
OMEGAh
arm
le
ss f
ro
m any liability or damage whatsoever arising out of the use of the Product(s) in
such a manner.
RETURN REQUESTS/
INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE
RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR)
NUMBER FROM OMEGA’S CUSTOMER SER
VICE DEPAR
TMENT (IN ORDER TO AVOID PROCESSING
DELAYS). The assigned AR number should then be marked on the outside of the return package and on
any correspondence.
The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent
breakage in transit.
FOR
WARRANTY
RETURNS, please have the fol-
lowing information available BEFORE contacting
OMEGA:
1.P
.O. number under which the product
was PURCHASED,
2.Model and serial number of the product under
warranty, and
3.Repair instructions and/or specific
problems relative to the product.
FOR
NON-WARRANTY
REPAIRS,
consult OMEGA
for current repair charges. Have the following
information available BEFORE contacting OMEGA:
1. P
.O. number to cover the COST
of the repair,
2.Model and serial number of product, and
3.Repair instructions and/or specific
problems relative to the product.
OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible.
This affords our customers the latest in technology and engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 1996 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied,
photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without
prior
written consent of OMEGA ENGINEERING, INC.
Servicing Nor
th America:
USA:
One Omega Drive, Box 4047
ISO 9001 Cer
tified
Stamford, CT 06907-0047
Tel: (203) 359-1660
Fax: (203) 359-7700
e-mail: [email protected]
Canada:
976 Bergar
Laval (Quebec) H7L5A1
Tel: (514) 856-6928
FAX: (514) 856-6886
email: [email protected]
For immediate technical or application assistance:
USAand Canada:
Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA
SM
Customer Service: 1-800-622-2378 / 1-800-622-BEST
SM
Engineering Service: 1-800-872-9436 / 1-800-USA-WHEN
SM
Mexico
En Espanol: (001) 203-359-7803
e-mail: [email protected]
FAX: (001) 203-359-7807
Servicing Eur
ope:
Czech Republic:
Frystatska 184, 733 01 Karvina, Czech Republic
Tel
: +
420 (0)59 6311899
FA
X: +
420 (0)59 63111
14
Toll Fr
ee: 0800-1-66342
e-mail: [email protected]
Germany/Austria:
Daimlerstrasse 26, D-75392 Deckenpfronn, Germany
Tel: +49 (0)7056 9398-0
FAX: +49 (0)7056 9398-29
Toll Fr
ee in Germany: 0800 639 7678
e-mail: [email protected]
United Kingdom:
One Omega Drive, River BendTechnology Centr
e
ISO 9002 Certif
ied
Northbank, Irlam, Manchester
M44 5EX, England
Tel: +44 (0)161 777-661
1
FAX: +44 (0)161 777-6622
Toll Fr
ee in England: 0800-488-488
e-mail: [email protected]
omega.com
TM
OMEGA
®
OMEGAnet
SM
On-Line Service
Internet e-mail
http://www.omega.com [email protected]
It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly
pursuing certification of its products to the European New Approach Directives. OMEGA will add the CE mark to every
appropriate device upon certification.
The information contained in this document is believed to be correct but OMEGA Engineering, Inc. accepts no liability for any errors it con-
tains, and reserves the right to alter specifications without notice.
WARNING:
These products are not designed for use in, and should not be used for, patient connected applications.
Where Do I Find Everything I Need for
Process Measurement and Control?
OMEGA…Of Course!
Shop online at omega.com
TEMPERATURE
Thermocouple, RTD & Thermistor Probes,
Connectors, Panels & Assemblies
Wire: Thermocouple, RTD & Thermistor
Calibrators & Ice Point References
Recorders, Controllers & Process Monitors
Infrared Pyrometers
PRESSURE, STRAIN AND FORCE
Transducers & Strain Gauges
Load Cells & Pressure Gauges
Displacement Transducers
Instrumentation & Accessories
FLOW/LEVEL
Rotameters, Gas Mass Flowmeters & Flow Computers
Air Velocity Indicators
Turbine/Paddlewheel Systems
Totalizers & Batch Controllers
pH/CONDUCTIVITY
pH Electrodes, Testers & Accessories
Benchtop/Laboratory Meters
Controllers, Calibrators, Simulators & Pumps
Industrial pH & Conductivity Equipment
DATA ACQUISITION
Data Acquisition & Engineering Software
Communications-Based Acquisition Systems
Plug-in Cards for Apple, IBM & Compatibles
Datalogging Systems
Recorders, Printers & Plotters
HEATERS
Heating Cable
Cartridge & Strip Heaters
Immersion & Band Heaters
Flexible Heaters
Laboratory Heaters
ENVIRONMENTAL
MONITORING AND CONTROL
Metering & Control Instrumentation
Refractometers
Pumps & Tubing
Air, Soil & Water Monitors
Industrial Water & Wastewater Treatment
pH, Conductivity & Dissolved Oxygen Instruments
M-4465/0707
All manuals and user guides at all-guides.com
all-guides.com
