NOTE:
DESCRIPTION
The OMEGA
®
LCWD Series Load Cell is a compact design with a full Wheatstone Bridge. Typical applications
include Clamping Forces, Die Loads, Bolt Stresses, Weighing Systems, and Structural Loads.
The load washer can be used as a washer, sensing compression force, or a compression load cell. When utilized
as a compression load cell, the load buttons supplied should be used. If the height of the buttons provided is too
restrictive, you can use one or none of the buttons. When you are using less than 2 buttons, be sure that the
active ridge (inside) of the washer is seated on a flat surface that transmits the load. Whenever possible, the
buttons provided should be used because they insure correct loading.
When used as a washer load cell, the set of spherical washers should be used as a washer cell, the set of
spherical washers should be used on one side of the load cell and a flat washer (not provided) on the other side of
the washer. When choosing a flat washer, make sure that the inner diameter of the flat washer is less than the
diameter of the inner ring of the load washer to insure that the active ridge is seated on the flat washer.
The following load cell types are available from OMEGA Engineering:
Dimensions in Inches (mm)
UNPACKING
Remove the Packing list and verify that all equipment has been received. If there are any questions about the
shipment, please call OMEGA Customer Service Department.
Upon receipt of shipment, inspect the container and equipment for any signs of damage. Take particular note of
any evidence of rough handling in transit. Immediately report any damage to the shipping agent.
The carrier will not honor any claims unless all shipping material is saved for examination. After examining and removing
contents, save packing material and carton in the event reshipment is necessary.
LOAD CELL
SPHERICAL WASHERS
Part
Rated
Part
Bore
H of
Bolt
Number
Capacity
Weight
Bore
O. D.
H
Number
Size
Button
Size
LCWD-200
200 lb
1.0 lb
0.40 (10)
1.00 (25)
0.35 (9.0)
SPW-2
0.35 (8.9)
0.37 (9.4)
5/16 (7.9)
LCWD-500
500 lb
1.0 lb
0.40 (10)
1.00 (25)
0.35 (9.0)
SPW-2
0.35 (8.9)
0.42 (10.7)
5/16 (7.9)
LCWD-1K
1,000 lb
1.0 lb
0.40 (10)
1.00 (25)
0.35 (9.0)
SPW-2
0.35 (8.9)
0.55 (14.0)
5/16 (7.9)
LCWD-2K
2,000 lb
1.0 lb
0.40 (10)
1.00 (25)
0.35 (9.0)
SPW-2
0.35 (8.9)
0.55 (14.0)
5/16 (7.9)
LCWD-5K
5,000 lb
1.0 lb
0.40 (10)
1.00 (25)
0.35 (9.0)
SPW-2
0.35 (8.9)
0.55 (14.0)
5/16 (7.9)
LCWD-10K
10,000 lb
1.0 lb
0.40 (10)
1.00 (25)
0.35 (9.0)
SPW-2
0.35 (8.9)
0.55 (14.0)
5/16 (7.9)
LCWD-20K
20,000 lb
1.5 lb
0.50 (13)
1.20 (30)
0.40 (10)
SPW-3
0.41 (10.3)
0.76 (19.3)
3/8 (9.5)
LCWD-50K
50,000 lb
2.0 lb
0.76 (19)
1.75 (44)
0.50 (13)
SPW-5
0.66 (16.7)
1.0 (25.4)
5/8 (15.9)
LCWD-100K
100,000 lb
3.0 lb
1.01 (26)
2.25 (57)
0.70 (18)
SPW-7
0.94 (23.8)
1.5 (38.0)
7/8 (22.2)
LCWD-200K
200.000 lb
6.0 lb
1.51 (39)
3.00 (77)
1.25 (32)
SPW-7
0.94 (23.8)
2.0 (50.8)
7/8 (22.2)
Cautionary Notes for Safe Product Use.
WARNING!
This symbol in this manual indicates a potential danger or hazard capable of
resulting in a serious injury or loss of life.
LCWD Series
Load Washer & Compression Load Cells
INSTRUCTION
SHEET
M1131/0509
Shop online at: omega.com e-mail: [email protected]
For latest product manuals: omegamanual.info
