D I S A S S E M B LY
STEP 1
Remove juice cup and residue container.
STEP 2
Remove
funnel top
from feed hole.
STEP 3
Loosen tightening bolt and swing down out of the way.
STEP 4
Lower bottom clamp.
STEP 5
Raise upper clamp.
STEP 6
Slide out the
gear housing unit
and the twin gears.
STEP 7
Set the twin gears aside.
STEP 8
Invert the
gear housing unit
and slide off the
bottom cover
.
STEP 9
Remove the
strainer screen
from the
gear housing unit
.
C L E A N I N G
NOTE: Cleaning is done after the Omega Juicer is turned off
and disassembled.
STEP 1
To dislodge any compacted pulp from inside the cover
housing, use the multi-purpose stick. Approach this compacted pulp
from the inside as well as the outside. Push the multi-purpose stick
back and forth through the pulp outlet hole.
STEP 2
Using a pan of water is helpful in dislodging pulp from the
various parts of the juicer while using a dishcloth, the multi-purpose
stick, or various brushes.
STEP 3
The strainer screen can best be cleaned with the long brush
for the inside and the shorter brush for the outside.
STEP 4
The twin gears can easily be cleaned with the short brush
under running water.
STEP 5
Use the multi-purpose stick to clean the pulp out of the twin
gear receptacles.
STEP 6
Wipe off any juice remnant from the motor housing with a
damp dishcloth.
CAUTION: To prevent electric shock or injury, never immerse the motor
housing in or under water!
