8 |
P a g e
4.2
High Power/Low Power Mode
The default Low Power Mode range of the IF-006 transmits up to 1.2km with a clear line of sight. The North
American variants of the Layer N IF-006 offer a
High Power Mode
feature that boosts the wireless transmit signal
range of the device to 3.2km with a clear line of sight.
Note:
Utilizing High Power Mode will lower the battery life of the IF-006. Refer to the table below for battery life
estimations based on transmit power and update time.
Transmit Power
Update Time
Battery Life*
Low
2 minutes
2 years
Low
90 minutes
5+ years
High
2 minutes
1 year
High
90 minutes
3 years
*Typical. Actual battery life may vary depending on the connected
sensor, signal strength, and environmental conditions.
To utilize High Power Mode, navigate to the
Device Settings
tab in the SYNC interface.
Click
Additional Settings
under the
Interface
Settings
section.
Check the
High Power Mode
box to enable it.
4.3
Transmit Interval
The Transmit Interval determines the time between readings for the Smart Probe. Probes connected to the IF-006
will have their transmit interval automatically set to 10 seconds if it is set to a number less than that to prevent
wireless congestion. This transmit interval will also be reset to your minimum interval based on your Layer N Cloud
account level once the IF-006 is paired. The Transmit Interval can be adjusted by navigating to the
Device Settings
tab in the SYNC interface and will appear beneath the
Sensor Settings
section.
Note:
SYNC can also be used to set passwords for your Layer N Smart Probes (refer to section
5 Setting Passwords
).
For more information on Omega’s SYNC configuration software, refer to the SYNC User’s Manual.