8
9
Calibration and Maintenance
9. Calibration and Maintenance
Calibration
Your transmitter has been factory calibrated to meet or exceed
the specifications outlined in this manual. The economical design
of the HX71 Series does not allow for field adjustment. Contact
our Customer Service Department if you believe your unit is not
functioning correctly.
Maintenance
If your Humidity transmitter will be used in a dusty environment, the
protective sensor cover may be removed for cleaning. Unscrew the
protective cover and gently blow compressed air through the cap. A
soft brush may also be used to remove dirt particles.
If the sensor is subjected to 100% condensation, it must be dried
to obtain correct readings. There will be no permanent damage or
calibration shift to the unit.
Units should not be exposed to high concentrations of ammonia or
alcohol vapors.
