Omega HHP8200 Series, User Manual, Page: 3 / 20

Introduction
1
Section 1 - Introduction
• The Meter will display all LCD segments when it is first turned on for approx.
3 seconds. Though you might see DATALOGGER, Y/M/D, REL, AVG... these
segments are not available for these meters.
• The LCD is divided into two distinct sections: One large (primary) top screen
and one smaller right - bottom screen (Relative Clock). The two display areas
keep you constantly updated with the pressure measurements.
• The Meter measures gauge pressure - a measure of pressure in psi that is
referenced to ambient pressure and differential pressure - a measure of the
difference two pressures.
• 11 Pressure units are selectable for imperial and Metric in different areas: bar,
mmHg, orin², kgcm², psi, inH², kPa, ftH²O, inHg, cmH²O, mbar. .
• 4 Manometer models for your choice: Pressure Range:
• 0~± 5 psi (HHP8205)
• 0~± 15 psi (HHP8215)
• 0~± 30 psi (HHP8230)
• 0~± 100 psi (HHP8200)
Please check the tubing is not leaking or damaged before using.
3