6
Manually Selecting a Range
The meter also has a manual range mode. In manual range, you select and lock
the meter in a range. To manually select a range:
Press [RANGE] button to hold the selected range. The symbol is displayed.
Subsequently pressing the [RANGE ] button will select each range in sequence
from the lowest to highest range. Hold the button for 2 seconds to return to the
Autorange Mode.
Mode Switch (
), (
W
)
Press this switch to toggle between DC and AC in the voltage measurements.
Press this switch to toggle between the
W
/continuity/diode modes. If the function
switch is set to
W
position.
Back-Light and Data-Hold Switch ( >2sec),(
H
):
Press this button briefly to activate DATA-HOLD mode. The "
H
" annunciator is
displayed.
Press this button for two seconds to turn the Back-Light on. As this also activates
the DATA-HOLD mode, briefly press the button to return to normal display. To
turn the Back-Light off press again for two seconds. The Back-Light will switch-
off automatically after about 30 seconds.
