7
RANGE Button
Press (RANGE) button to select the Manual Range mode and turn off the
"AUTO" annunciator.
In the Manual Range mode, each time you press (RANGE) button, the range
(and the input range annunciator) increments, and a new value is displayed.
To exit the Manual Range mode and return to autoranging, press and hold
down (RANGE) button for 2 seconds. The "AUTO" annunciator turns back on.
Back-Light and Data-Hold Switch ( >2sec),(
H
):
Press this button briefly to activate DATA-HOLD mode. The "
H
" annunciator
is displayed.
Press this button for 2 seconds to turn the Back-Light on. As this also activates
the DATA-HOLD mode, briefly press the button to return to normal display.
The Back-Light will switch-off automatically after about 30 seconds.
RESET Button
Press RESET button to reset or initialize system logic. If you suspect that the
meter is not operating properly or the meter was power-down, you can always
restart from the begining by press the RESET button.
