background image

1

Section 1 - General Description

The OMEGA

®

Model EWS-BP-A is a low cost, wall mounted barometer/transmitter. A

temperature compensated, solid state pressure sensor measures atmospheric pressure. The
measurement is then converted to an industry standard, user selectable 4-20 mA or 1-5
Vdc output signal scaled across the measurement range.

Section 2 - Unpacking

Remove the packing list and verify that you have received all your equipment. If you have
any questions about the shipment, please call our Customer Service Department at

1-800-622-2378 or 203-359-1660

. On the web you can find us at:

www.omega.com   e-mail: [email protected]

When you receive the shipment, inspect the container and equipment for any signs of
damage. Note any evidence of rough handling in transit. Immediately report any damage
to the shipping agent.

The carrier will not honor any damage claims unless all shipping
material is saved for inspection. After examining and removing
contents, save packing material and carton in the event reshipment is
necessary.

The following items are supplied in the box with your transmitter.

• This Manual, #M-3502

(1 ea.)

• #6 Wall Anchor

(2 ea.)

• #6 Mounting Screw

(2 ea.)

Additional EWS Series Models Available

Model

Description

EWS-TC-(*)

Wall mount Thermocouple Sensor (* = insert type, J, K, T, E)

EWS-RTD

Wall mount RTD Sensor (100Ω Pt., .00385)

EWS-TX

Wall mount Solid-state Temperature Sensor/Transmitter

EWS-RH

Wall mount Relative Humidity/Temperature Transmitter

Recommended Accessories 

Power Supply, OMEGA

®

Part No.: 

PSU-93

Shielded 4-conductor cable, OMEGA Part No.: 

TX4-100

Conduit Box Mounting Kit, OMEGA Part No.: 

EWS-MB

NOTE:

Summary of Contents for EWS-BP-A











Reviews: