![background image](http://html1.mh-extra.com/html/omega/comfort-start/comfort-start_operating-and-installation-instructions-manual_3923223009.webp)
Remote Panic & Emergency Flashlight
To Activate Panic*:
Press & Hold the left transmitter LOCK button
for 3 seconds
THE PARKING LIGHTS
WILL FLASH
*
- The horn will sound and the parking lights will flash. To deac-
tivate Panic, press either the LOCK or UNLOCK button.
* Connection of the horn may require additional parts, and may not be
included in a standard installation.
THE HORN WILL
SOUND
9
*
To Operate the Emergency Flashlight:
Press the transmitter LIGHT
button
- Pressing this button lights the transmitter’s
Cool Blue LED light brightly without send-
ing a radio transmission. This should
used sparingly, to prolong the
transmitter battery life.
In some applications the solenoid wire will rest at ground. In these cases:
- Cut the solenoid wire:
- Connect the switch side to pin
#
87a of the external relay.
- Connect the solenoid side to pin
#
30 of the external relay.
- Connect 12 Volts to pin
#
87 of the external relay (Fused).
32
20-Gauge Brown Wire:
( - ) Horn Output
Connection If Desired.
The Brown wire is a 500mA Negative out-
put designed to sound the vehicle’s horn for audible operation confirmations and the
remote “panic” feature. The Brown wire may be connected directly to the vehicle's horn
configured as follows:
30
85 87a 86
87
Connect to 12 Volts or Negative
Ground as needed (In this example
Negative is required)
Trunk
Switch
Gray Wire
12 Volts
Relay
Release
Solenoid
Control
Module