Omega CNi16A, User Manual, Page: 46 / 73

42
3.2.11 Ramp & Soak
Alarm must be DISABLED if Ramp is ENABLED.
Figure 3.10 Flow Chart for Ramp and Soak
ENTER RAMP AND SOAK MENU:
Press
a
1)
Press
a
, if necessary, until
CNFG
prompt appears.
Press
d
2)
Display advances to
INPT
Input Menu.
Press
a
3)
Press
a
, if necessary, until Display advances to
RAMP
Ramp
and
SOAK
Soak Menu.
RAMP ENABLE/DISABLE SUBMENU:
Press
d
4)
Display advances to “Ramp Enable/Disable” Submenu and
flashes
ENBL
or
DSBL
.
Press
b
5)
Scroll through the available selections: “Enable” or “Disable”.
Press
d
6)
Display shows
STRD
stored message momentarily and then
advances to
SOAK
Soak Enable/Disable Menu.
If
RAMP
Disable
was selected, display skips to the next menu
item (ID Code).
SOAK ENABLE/DISABLE SUBMENU:
Press
d
7)
Display flashes
ENBL
or
DSBL
.
Press
b
8)
Scroll through the available selections: “Enable” or “Disable”.
Press
d
9)
Display shows
STRD
stored message momentarily and then
advances to “Ramp Value” Submenu.
It
is required that you put the controller in the Standby Mode for any
configuration change other than Set Points & Alarms.