background image

6

3.  When the heating zone is in double loop working mode,the bouble loop 

     indicator shows ”P”.

4.  You can select the size of the heating zone according to the size of the pot.

Lock Function

To ensure the safety of children,the hob is fitted with an  lock device

Active the lock function

Press  the “      ”,the hob then goes into  lock mode, the timer shows “

   

” and 

the rest of the keys are disabled except the ON/OFF keys .
Deactiving the lock function

Hold down the “      ” for several seconds and the hob will return to normal 

working.

The power of each heating zone are shown as follow:

     1                 2

 1200W      1800W

1000W   2200W

4

3

Heating zone

Power

Inner       double

1200W

Timer function 

Cooking timer 

First select the cooking zone by press the “-” or “+”of the relevant heating 

zone,then the cooking zone display flashing.Then adjust timer by pressing “-” 

or “+” of timer,the timer is confirmed after the timer indicator flashing 5 seconds,

a red dot display at corresponding cooking zone indicator ,it reminds you a 

cooking timer have been setted on this cooking zone .When cooking timer 

expires,the corresponding cooking zone will be switch off automatically.

Note:Cooking timer only works for one cooking zone at the same time.

Minute Reminder

Timer can be used as a minute reminder.

Press “+”or “-”of timer, the timer indicator flashes “00”,adjust timer by pressing

“+”or “-”of timer. When the time is setted, the timer indicator will stop flahing 

after 5 seconds, minutes reminder starts. Buzzer will beep for 30 seconds and 

the timer indicator shows “--”when the setting time finished , the work state will 

not be affected by the minute reminder.

Timing cancellation

Press “+” and “-”of timer simultaneously, the timer cancelled automatically,and 

the timer indicator shows “--”

Summary of Contents for CCT2BB












Reviews: