1)
Connect the module, LED comes ON solid.
2)
Turn the ignition key to the
ON
position. LED will turn off then
it will begin a flash pattern that matches the vehicle type selection.
(The default vehicle type selection is Type 1.)
*If the module has never been programmed or has been reset,
LED will indicate which TYPE the module is in by the number of flashes.
3)
To change the vehicle type, press and release the program button until LED
flash pattern matches the selected vehicle type.
LED flash pattern will match the Vehicle Type selected.
Example: 1 flash = Type 1, 2 flashes = Type 2 and so on.
4)
To save the vehicle type selection, press and hold the program button until the
LED flashes rapidly. The module will then exit the programming. The module is
now programmed.
*If LED comes on solid, turn the key to start the engine.
VEHICLE TYPE PROGRAMMING:
Section C
*If the module has already been programmed, the number of flashes indicate the type
programmed when applying power to module, one time only.
Module is now ready to function.
VEHICLE TYPE CHART
2003 2002 2001
VEHICLES
2006
2005
2004
CARAVAN
TOWN & COUNTRY
2
2
2
2
2
2
LIBERTY
2
2
2
2
2
N/A
NOTE: Once you have determined your vehicle type,
please refer to the Wire Guide.
Section D
MODE 7
=
MODE 8
= *OPTION
1:
No reset (Default)
*OPTION 1
: Vehicle
with
alarm (Default)
OPTION 2
: Vehicle
without
alarm
OPTION 2
:
Complete reset of option and module
* = Default
USER SETTINGS - OPTIONAL PROGRAMMING:
USER MODES
are identified by a slow LED flash pattern. 1 slow flash=Mode1, 2 slow flashes=
Mode 2 etc.
Section E
NOTE: Only MODES 7 & 8 are available.
1)
Key
“OFF”
position,
press
and
hold
program button for 2 seconds, LED will flash rapidly for 2 seconds. Release button, LED will identify the MODE
selection with a slow flash pattern (1- 8 slow flashes) and then will identify OPTION selection with a fast flash pattern. (1 or 2 fast flashes)
2)
To change
MODE
,
push button
one time, LED will confirm
MODE
with slow flash pattern (1-8 slow flashes).
3)
To change OPTION SELECTION within a MODE,
press LOCK or UNLOCK
button on the aftermarket remote control system. LED will identify option
selection with either one or two fast flashes.
4)
To save and exit programming,
press
and
hold button
until LED flashes one time rapidly, showing end of OPTION programming.
1
1
1
1
1
1
1
1
1
N/A
N/A
N/A
2
2
2
PACIFICA
N/A
N/A
N/A
GRAND CARAVAN
VOYAGER
N/A
N/A
N/A
1
1
1
Platform # 03 Firmware: CHDL6+
Description:
Caravan/Pacifica Door Lock Alarm Interface (NO KEY REQUIRED)
Installation
Manual
(2\2 Pages)
