U.S. Patent No. 8,856,780
CArtriDge inStALLAtiOn
1
Slide cartridge into unit. Notice
button under LED.
2
Ready for Module Programming
Procedure.
tyPe 1, 3 & 4 - MODULe PrOgrAMMing PrOCeDUre
7
Turn key to OFF position.
OFF
5
Turn key to Start position and
Hold for 3 seconds.
START
2
Insert key into ignition.
Wait 3 seconds.
4
Turn key to ON position.
Wait 3 seconds.
ON
3
Turn key to Accessory position.
Wait 3 seconds.
ACC
1
Close driver door.
Re-open driver door to wake up
data bus.
8
Module Programming
Procedure completed.
6
Release key from Start position
and return to ON position.
Wait, LED will turn solid BLUE
for 2 seconds.
ON
tyPe 2 - MODULe PrOgrAMMing PrOCeDUre
6
Module Programming
Procedure completed.
5
Turn key to OFF position.
OFF
2
Insert key into ignition.
3
Turn key to START position.
START
1
Close driver door.
Re-open driver door to wake up
data bus.
4
Wait, LED will turn solid BLUE
for 2 seconds.
(If after 15 seconds the LED did
not turn solid BLUE, press on
the programming button once.)
Page 11 of 12
OL-BLADE-AL(DL)-GM4-EN
20150714
InStaLL GUIDe
automotive Data Solutions Inc. © 2015
All in one
General Motors
Doc. No.: ##22406##