Section 2 - Installation
2.1
Unpacking and Inspection
Remove the packing list and verify that you have received all your equipment.
If you have any questions about the shipment, please call our Customer Service
Department at
1-800-622-2378 or 203-359-1660. We can also be reached on the Internet at
www.omega.com
e-mail: [email protected]
When you receive the shipment, inspect the container and equipment for any
signs of damage. Note any evidence of rough handling in transit. Immediately
report any damage to the shipping agent.
The carrier will not honor any damage claims unless all shipping material is saved for inspection.
After examining and removing contents, save packing material and carton in
the event reshipment is necessary.
The following items are supplied in the box:
Item:
OMEGA Part Number:
BB705 Blackbody Calibration Source
BB705 or BB705-230
User Manual
M-3638
Calibration Certificate
CAL-3 (3 DATA
POINTS)
Power Cord
200-0028 (Domestic),
200-0107 (International)
2.2 Mounting
Mount the unit on a bench, table top or shelf in a horizontal position and operate
at least ten inches from any air obstructions to the fan, front panel, rear panel,
sides and top of the unit, in an ambient environment between the specified 0 to
35°C (32 to 95°F).
2.3
Ambient Temperature
The target cavity of the BB705 can achieve any temperature within the
specified temperature range when being operated in normal specified ambient
temperature environments. The maximum specified target plate temperature of
1046°C (1915°F) can be achieved over the entire specified ambient temperature
range of 0 to 35°C (32 to 95°F).
Installation
2
2-1
NOTE: