2
1 YEAR LIMITED WARRANTY
For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option,
without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This
limited warranty is a consumer's exclusive remedy.
Performance of any obligation under this warranty may be obtained by returning the warranted product, freight
prepaid, to SFA Companies Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO 64153.
Except where such limitations and exclusions are speci
fic
ally prohibited by applicable law, (1) THE
CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE
PRODUCTS AS DESCRIBED ABOVE. (2) SFA Companies SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL
OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER. (3) ANY IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED TO NINETY DAYS, OTHERWISE THE REPAIR, REPLACEMENT OR REFUND AS
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER,
AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. (4) ANY MODIFICATION,
ALTERATION, ABUSE, UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTY AND
IS NOT COVERED BY THIS WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not
apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. This warranty gives you
specific
legal rights, and you may also
have other rights, which vary from state to state.
SFA Companies
10939 N. Pomona Ave. Kansas City, MO 64153
1-888-332-6419
[email protected]
OPERATING INSTRUCTIONS
1. Pull entire length of cord from reel, and then plug into any 110-125V, 3 conductor outlet.
INSTALLATION
1. Select location within 2 feet of an electrical outlet.
2. Mount bracket directly into the ceiling or wall.
3. Insert reel into bracket lining up small holes.
4. Insert Locking Pin to secure Reel to Bracket.
5. The multi-angle bracket provides 5 positions to adjust the angle desired.
6. Adjust Ball Stop so light hangs at desired length when cord is retracted.
Note:
This product has a 3-prong grounded electrical plug. The plug must be used with an outlet that is
properly installed and grounded in accordance with local codes and ordinances. If using an extension
cord, make sure it is the proper configuration for a grounded connection.
2. Depress switch in handle to turn light on/off.
3. To operate Reel pull cord out to desired length and stop. If cord does not hold, continue to pull cord slowly,
stopping every four inches. This will engage lock. To retract pull cord out 2 to 4 inches and guide the cord
slowly back into the reel.
4. Keep cord clean to assure smoothest automatic retraction.
5. Do not allow the cord to retract unrestricted back into reel.
BULB REPLACEMENT INSTRUCTIONS
1. Remove power supply plug from outlet.
2. Remove bumpers.
3. Open lens cover, grasp end of bulb and pull straight out.
4. Slide in new bulb and push down into socket. Close lens cover.
5. Replace bumpers.
