NG
TO ASSEMBLE
NOTE:
For best results, go through the assembly procedures, carefully
noting all cautionary points and hints, which are included for your
understanding and benefit.
STEP 1
Place
bowl
on
motor base housing
with spout facing you and
in the middle of the two raised projections.
STEP 2
Place
strainer basket
inside
bowl
, making certain that it rests
flat on platform center hex nut.
STEP 3
Insert
cutter blade
inside
strainer basket
with teeth up
centering it over hex nut.
STEP 4
Tighten
clutch nut
finger tight.
STEP 5
Insert optional filter liner into
strainer basket
.
STEP 6
Place
cover
on
bowl
with feeder chute opening to rear.
STEP 7
Place tabs of both
latch arms
over
cover
and secure.
STEP 8
Insert
plunger
in
cover
opening.
TO DISASSEMBLE
STEP 1
Remove
plunger
from
cover
opening.
STEP 2
Release both side
latch arms
by inserting finger into side
opening at bottom of the motor base and pulling upward.
STEP 3
Remove
cover
.
STEP 4
Unscrew
clutch nut
by turning counter-clockwise.
STEP 5
Lift out
cutter blade
from inside
strainer basket
.
STEP 6
Remove
strainer basket
.
STEP 7
Remove
bowl
.
OMG-259_9k_1k_manual_r1.qxd 4/22/05 11:33 AM Page 7
