GB
14
- Turn the knob left/right, the hours flash.
- Modify the flashing hours value turning the knob left/right.
- Push the knob to switch back and forth between hours and minutes or wait a few
seconds until the minutes flash.
- Modify the flashing minutes value the knob left/right.
- Wait until the new End of Cooking time value stops flashing.
The display will flash End and its value alternatively for a few seconds then it will show
the time of day, the
symbol and the letter to indicate that a timed cooking is
active. The cooking duration is updated automatically.
3. Repeat the same operations of point 1 then push the knob until End appears. the
control shows the “current time + cooking time” as the initial stop time. It’s not
possible to lower the end of cooking time below this value. In order to set the actually
desired end of cooking time in a 24 hours range:
- Turn the knob left/right, the hours flash.
- Modify the flashing hours value turning the knob left/right.
- Push the knob to switch back and forth between hours and minutes or wait a few
seconds until the minutes flash.
- Modify the flashing minutes value turning the knob left/right.
- Wait until the new End of Cooking time value stops flashing.
The display will flash End and its value alternatively for a few seconds then it will
show the time of day and the letter to indicate that a delayed cooking has been
programmed. As soon as the delay time expires, the oven starts and works for the
programmed cooking time.The
symbol is displayed.
At the end of any timed activity the control shuts down the oven, the buzzer sounds
a warning sequence (two short beeps repeated every 3 seconds) to recall the user
attention, for a maximum time and makes the time related icons (
, ) flash on the
display. Push the knob to silent the buzzer and reset the warning message.
Turn the mode selector to ZERO (OFF) position before reusing the oven.
Oven functions
The control can manage many cooking functions, here below described, their number
and availability depends on the oven model. The temperature range is between 50°C
and 250°C for most functions. Preset temperatures are mainly 190°C for convection
modes, 210°C for thermal modes and 230°C for grilling functions.
Exceptions are Eco-Bake (preset=190°C), Pyrolyse (fixed 475°C), and low temperature
modes (Light, Defrost, Keep Warm).