background image

SPECIFICATIONS

Model

Capacity

Jack Size ( L x W x H)

Min. Height Max. Height Hyd. Range

Saddle Dia.

 22040C/ 22041C

4 Ton

50-5/8" x 15-3/8" x 7-1/2"

5"

24"

19"

5-1/2"

 22050C/ 22051C

5 Ton

57-3/4" x 17" x 7-5/8"

7"

27"

20"

6-1/2"

 22100C/ 22101C

10 Ton

54-3/4" x 20" x 12-3/4"

7"

27"

20"

7-3/8"

SAFETY and GENERAL INFORMATION

Save these instructions. 

For your safety, read, understand, and follow the information provided with and on this jack 

before using. The owner and operator of this equipment shall have an understanding of this jack and safe operating 

procedures before attempting to use. The owner and operator shall be aware that use and repair of this product 

may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's 

native language before use of this jack is authorized. If any doubt exists as to the safe and proper use of this jack, 

remove from service immediately. 

Inspect before each use.

 Do not use if broken, bent, cracked or damaged parts are noted. Any jack that appears 

damaged in any way, or operates abnormally shall be removed from service immediately. If the jack has been or 

suspected to have been subjected to a shock load (a load dropped suddenly, unexpectedly upon it), immediately 

discontinue use until jack has been checked by a factory authorized service center (contact distributor or manufacturer 

for list of authorized service centers). It is recommended that an annual inspection be done by qualified personnel. 

Labels and Operator's Manuals are available from manufacturer. 

PRODUCT DESCRIPTION

Omega Long Chassis Hydraulic Service Jacks are designed to lift, but not support, one end of a vehicle. Immediately 

after lifting, loads must be supported by a pair of appropriately rated jack stands. Air actuated function available for 

Models 22041C, 22051C & 22101C.

 

Air actuated units require at least 7.8 CFM @ 110 - 175 PSI. A minimum of 150 

PSI air pressure is required to raise rated capacity load.
           

NEVER

 use hydraulic jack as stand-alone device. After lifting, 

immediately

 support the lifted vehicle with

           a pair of appropriately rated jack stands.

 

!

ONE YEAR LIMITED WARRANTY

 

For a period of one (1) year from date of purchase, 

SFA Companies

 will repair or replace, at its option, 

without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This 

limited warranty is a consumer's exclusive remedy.

 

Performance of any obligation under this warranty may be obtained by returning the warranted product, freight 

prepaid, to 

SFA Companies 

Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO 64153.

 

Except  where  such  limitations  and  exclusions  are  specifically  prohibited  by  applicable  law,  (1)  THE 

CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE 

PRODUCTS AS DESCRIBED ABOVE. (2)

 SFA Companies

 SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL 

OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER. (3) ANY IMPLIED WARRANTIES, INCLUDING WITHOUT 

LIMITATION  THE  IMPLIED  WARRANTIES  OF  MERCHANTABILITY AND  FITNESS  FOR A  PARTICULAR 

PURPOSE, SHALL BE LIMITED TO ONE YEAR, OTHERWISE THE REPAIR, REPLACEMENT OR REFUND AS 

PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, 

AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. (4) ANY MODIFICATION, 

ALTERATION, ABUSE, UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTY AND 

IS NOT COVERED BY THIS WARRANTY.

 

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not 

apply to you.  Some states do not allow the exclusion or limitation of incidental or consequential damages, so the 

above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also 

have other rights which vary from state to state.

2

Summary of Contents for 22040C













Reviews: