background image

Models 22040C, 22050C & 22100C

Models 22041C, 22051C & 22101C 

(Air Options)

Long Chassis Hydraulic Service Jacks

Model

22040C, 22041C

22050C, 22051C

22100C, 22101C

Printed in China

22040C-M1 rev 06/08

Operating Instructions & Parts Manual

Read this manual and follow all the Safety Rules and Operating Instructions before using this product.

SFA Companies 

http://www.omegalift.com

Capacity

  4 Ton

  5 Ton

  10 Ton

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. 

Obey all safety messages that follow this symbol to avoid possible injury or death.

 

!

!

  

ADVERTENCIA

• Leer, comprender, y seguir las instrucciónes antes 

de utilizar el aparato.

• El manual de instrucciónes y la información de 

seguridad deben estar comunicado en lengua del 

operador antes del uso.

• No seguir estas indicaciónes puede causar daños 

personales o materiales.

!

   

WARNING

To avoid 

crushing and related injuries

:

NEVER

 work on, under or around a 

load supported only by a hydraulic 

jack. 

ALWAYS

 use adequately rated 

jack stands.

U.S. Patent No's. 5,755,099 • 5,946,912 • 5,341,723

Summary of Contents for 22040C













Reviews: