29
En
gl
is
h
1.3.
Setting the date and hour hands:
Pull the crown out to position 2. Then turn the crown: the hand
moves in 1-hour jumps. If it is necessary to correct the date (A),
continue to turn the crown and the date will change automa-
tically when switching from AM to PM, or the contrary, depen-
ding on the direction the crown is turned. Then push the crown
back to position 1.
Important:
when setting the date, it is essential to check the
date. If need be, pass midday (no date change) or midnight
(date changes) to make sure the time is set in AM or PM as
appropriate.
Note:
corrections in position 3 have no effect on the date, even
if the hour hand passes midday or midnight. The watch stores
the date in its memory (including whether AM or PM) before the
time is reset. Setting the hours, minutes and seconds, around
midnight and midday may therefore result in the calendar shif-
ting by 12 hours.
2.
Checking and correcting the calendar: month, yearly
cycle and date.
2.1.
Display and correction of the month.
Press and hold the crown in position 0 for more than 3 seconds,
the month will be displayed for 8 seconds (B). 1 = January, 2 =
February, ..., 12 = December. The month can be corrected during
these 8 seconds. Pull the crown out to position 2, turn the hour
hand through one full revolution. The month will move forwards
or backwards.
repeat the procedure until the required month is displayed, then
put the crown back to position 1.
Perpetual calendar
Operating instructions
2
k
Í
Summary of Contents for 21032422001001
Page 1: ...E 10 ...