24
Self-winding chronograph with or without date
Operating instructions
2
CALIBRE 3202
(fig. XVIII)
CALIBRE 3330
(fig. XXV)
The crown has 2 positions:
Watch functions:
1.
Normal position (wearing position):
when the crown is posi-
tioned against the case, the crown ensures that the watch is water-
resistant.
Occasional winding:
if the watch has not been worn for 45 hours
or more, wind it up with the crown in position 1.
2.
Time setting:
hours – minutes – seconds. Pull the crown out to
position 2. The seconds hand will stop. Turn the crown forwards or
backwards. Synchronise the seconds by pushing the crown back to
position 1 to coincide with a given time signal.
Calibre 3330 (fig. XXV)
Correcting the date:
press the corrector (C) positioned at 10 o'clock.
Chronograph functions:
•
Pusher A:
start – stop, start – stop, etc.
Timing to 1/8 of a second for up to 12 hours.
•
Pusher B:
reset (after a stop).
Note:
never push the chronograph’s two pushers (A and B) simulta-
neously (calibre 3202). The reset function should only be done after
the chronograph has stopped.
Warning:
correcting is impossible between 8.30 pm and 11 pm.
CALIBRE 3220
(fig. XVI)
ê
Summary of Contents for 1151
Page 1: ...I 20 I 20 I 20 E 21...