2 Button
/
1 Way
Powersports Security System
2 Button
/
1 Way
Powersports Security System
QUICK START
OPERATION GUIDE
QUICK START
OPERATION GUIDE
PROGRAMMING REMOTES
ALARM TRIGGER ZONE DIAGNOSTICS
LED FLASHES
VIOLATED ZONE
4
Tilt or shock sensor triggered
5
Instant trigger wire activated
6
Loop wire triggered
7
Ignition turned on while armed
If the system is disarmed after a trigger event, the
status LED will flash to indicate which zone(s) was
triggered.
PROGRAMMING REMOTES TO THE SYSTEM (UP TO 4)
BEFORE YOU BEGIN: Have all remotes for the system at hand.
1) Disarm the system
2) Turn the ignition key “ON” 5 times in 15 seconds (leave the key “ON”).
- After 3 seconds, the horn will briefly sound
3) Press & release any button on each remote one after the other.
- The siren will chirp for each remote learned (MAX: 4).
- NOTE: When a 5th remote is learned the first remotes is erased and so on.
- NOTE: All other button functions will automatically be assigned.
4) Turn the ignition key “OFF” to exit programming.
- NOTE: The system will exit at any time after 30 seconds of no activity.
3
2
OTHER FUNCTIONS
FUNCTION
ACTION
NOTE
Valet Mode ON/OFF
Ignition ON, OFF, ON, , ,
Short chirp with each button press. The LED will turn on while in valet mode. The LED will
turn off while Ignition is on and will automatically turn off after 96 hrs of no activity to save
the vehicle battery.
Remote activated
Anti-Hijacking
for 3 seconds with Ignition ON
This will start the anti-hijacking routine. See programmable features in installation guide
about configuring this feature on/off. The LED will flash quickly. The siren will chirp once ev
-
ery 3 seconds (5 times). Then the siren will chirp once every 1.5 seconds (8 times). After this
the siren will sound, the parking lights will flash and the vehicle disable relay will activate.
Emergency override must be performed to cancel anti-hijacking.
EMERGENCY OVERRIDE
1) WIth the system tirggered, turn the ignition key “ON” 5 times within 15 seconds (remain in the “ON” position).
- The LED will flash once quickly then turn on for 2 seconds.
- NOTE: If you have a custom pincode programmed, you must wait until the LED flashes equal to your pincode before performing step 2.
2) Within 5 seconds of step 1, turn the ignition key “OFF” then “ON” again
- The siren will chirp and the lights will flash 4 times indicating the system is disarmed.
POWER SAVING MODE
- DISARMED/VALET: After 96 hours in the disarmed state or valet mode, the system will enter a sleep mode to preserve vehicle battery
life.
- ARMED: After 24 hrs in the armed state, the LED will flash once every 4 seconds. After 48 hrs, it will flash once every 8 seconds. After 96
hours, the LED will turn off and the system is in full power save mode.
- If any input circuit is activated while in sleep mode, the system will chirp the siren 10 times.
Register today
at www.
CarAlarm
.com
to learn about your
warranty
& download product guides.
