Step 2: Locate the Bearing with the bottom up, Make sure the plas-
tic catch is engaged. Attach to the shelf with 2 - #8 x 1” Flat
Head Wood Screws, through the outer race of the bearing.
Make sure the screws go into the 2 holes drilled in Step 1.
Step 3: Remove the drawer from the Easy Access Corner Pantry by
pulling it out and up while depressing the 2 latches on the
underside of the drawer.
Step 4: Temporarily install the Easy Access Corner Pantry by attaching
it to the inner race of the bearing with at least 2 - 1/4 - 20 X 1
flat head machine screws. Spin it and make sure it clears the
inside of the cabinet and stops in the correct position. Make
any necessary adjustments to the bearing location if it does
not.
Step 5: Remove the Easy Access Corner Pantry and attach the bear-
ing with 2 more #8 x 1” Flat Head Wood Screws
Step 6: Install the Easy Access Corner Pantry by attaching it to the
inner race of the bearing with 4 ea. 1/4 - 20 X 1 flat head ma-
chine screws. Spin it and make sure it clears the inside of the
cabinet and stops in the correct position
Step 7: Set the drawer on top of the slide rails and push in to the back
until you hear the catches engage.
Form OME-093, 03/2014
©Omega National Products