Step 3:
Position unit so the drawer fronts are even
with, or slightly behind, door opening.
(See Figure 3)
Screw unit to cabinet bottom using the (4) # 8
x 3/4" screws (See figure 3A)
#6 x 1 1/4" Screws
Step 4:
Postion caddy slide assembly into cabinet, set-
ting mounting rails on cabinet bottom and front
of assembly against back of face frame.
Fasten slide assembly to cabinet side panel
using (4) #6 x 1 1/4" screws. (See figure 4)
Figure 3
Figure 4
Form OME-063, 01/2007
©Omega National Products
Step 2:
Slide unit back into cabinet and then
rotate front of unit downward into position.
(See figure 2)
Figure 2
Suggested Screw Locations
Figure 3A
