2
SPECIFICATIONS
Figure 1 - Models 32066 & 32126 Components (model 32126 shown)
Model
Capacity
(per pair)
Base Size
Min. Height
Max. Height
32066
6 Ton
11” x 9-3/4”
15-3/4”
24-3/8”
32126
12 Ton
14-3/4” x 12-3/4”
19-3/4”
30-1/4”
SAFETY AND GENERAL INFORMATION
Save these instructions.
For your safety
read, understand, and follow
the information provided with and on this
pair of jack stands before using. The owner and operator of this equipment shall have an understanding of the jack
stands and safe operating procedures before attempting to use. The owner and operator shall be aware that use of
this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the
operator's native language before use of these jack stands is authorized. If any doubt exists as to the safe and proper
use of these jack stands, remove from service immediately.
Inspect before each use.
Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any
jack stand that appears damaged in any way, operates abnormally or is missing parts, shall be removed from service
immediately. If you suspect that the jack stand was subjected to a shock load (a load dropped suddenly, unexpectedly
upon it), immediately discontinue use until the stand has been checked by a factory authorized service center (contact
distributor or manufacturer for list of Authorized Service Centers). It is recommended that an annual inspection be
done by qualified personnel. Labels and owner’s manuals are available from manufacturer.
PRODUCT DESCRIPTION
Omega "MagicLift™"
Jack Stands are designed to support rated capacity, partial vehicle loads consisting of one end
of a vehicle. Your Omega Jack Stands have a special Magic-Lift feature which allows the ratchet bar to automatically
adjust till it makes contact. Use as a matched pair to support one end of a vehicle only.
WARNING:
Never
use automotive jack stands to support
both ends
or
one side
of a vehicle! Use only
one (1)
pair per
vehicle. Rated capacity is
per pair
only!
WARNING:
The "Magic Lift" adjustment function of this jack stand is not designed to support a load. The
Locking Pawl
must
be properly engaged for the jack stand to support weight.
!
!
Ratchet Bar
Locking Handle
Locking Pawl
Base Frame
Ratchet Bar Collar
Air Spring
Ratchet Bar
Locking Pin
Spring