background image

2

Figure 1 - Typical Jack Nomenclature

SAFETY AND GENERAL INFORMATION

Save these instructions. 

For your safety, read, understand, and follow the information provided with and on this 

device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics 

and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use 

and repair of this product may require special skills and knowledge. Instructions and safety information shall be read 

to and discussed with the operator in the operator's native language, making sure that the operator comprehends 

their contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this 

device, remove from service immediately. 

Inspect before each use.

 Do not use if abnormal conditions such as cracked welds, damaged, loose or missing 

parts are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall 

be removed from service until repaired. If the equipment has been or is suspected to have been subjected to an 

abnormal load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact 

distributor or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be 

made by an authorized repair facility. Labels and Operator's Manuals are available from the manufacturer. 

PRODUCT DESCRIPTION

This Hydraulic Service Jack is designed to lift, but not support, one end of a vehicle. MagicLift™ service jacks have 

a unique feature that provides fast, no load lifts 

to

 the jacking point, at which time it lifts in approximately  0.75~0.2" 

increments.

WARNING: 

Do not use hydraulic jack as stand-alone device. After lifting, immediately support the lifted vehicle 

with a pair of appropriately rated jack stands.

PREPARATION/ASSEMBLY

Before Use

1. Assemble the 2-piece handle with provided bolt.

2. Always secure the handle into the handle fork by means of the bolt and lock washer provided. Tighten securely 

to prevent accidental removal of handle while in use. 

WARNING:

 Do not lift or carry jack by handle.  Handle could dislodge and jack fall, resulting in possible injury 

or property damage.

3.  Before using this product, read the operator's manual 

completely and familiarize yourself thoroughly with 

the product and its components, and recognize the 

hazards associated with its use.

4.  Verify that the product and application are compatible.

5.  To familiarize yourself with basic operation, locate  and 

turn the release valve (pump handle):

a. 

Clockwise

  until  firm  resistance  is  felt  to  further 

turning. This is the ‘

CLOSED

’ release valve position 

used to raise the saddle.

b. 

Counter-clockwise

, but no more than 1/2 turn from 

the closed position. This is the ‘

OPEN

’ release valve 

position used to lower the saddle.

6. With saddle fully lowered and release valve closed, 

pump the handle. If lift arm responds immediately, 

jack is ready for use.  If jack does not respond, follow 

the 

Bleeding/Venting Trapped Air

 instructions on  

page 3.

 

!

 

!

Handle 

(release valve)

Oil Filler Plug 

(ref. Parts illustration for location)

Lift Arm

Saddle

Front Wheel

Caster

Handle 

sleeve

Summary of Contents for MagicLift 25037










Reviews: