5
Placement
Placement and Installation
Place the
on flat and dry ground, and keep at least 50 cm from walls
etc. (figure 1)
Installation
• Spin slide bar connector into exhaust hose first, then spin the exhaust hose into
exhaust connector (counter-clockwise).
• Put slide bar connector into adjustable slide bar, adjust window open width in
order slide bar match window well, and the length of slide bar is adjustable.
(figure 2)
FIGURE 1
Installation Errors
• Free access of exhaust pipe is important; If air is not taken out it will affect
performance of the air conditioner.
• Avoid sharp bends in the exhaust-pipe (figure 2)
• Make sure air in exhaust pipe can run smoothly (figure 3)
Summary of Contents for OAPC187
Page 1: ...OAPC187 PORTABLE AIR CONDITIONER ...
Page 7: ...7 Parts List ...
Page 15: ...Appendix A Circuit Diagram ...
