omega altise
Control Panel
1. ON/OFF
(power)
button
2. Timer
3. ‘Up’
button
4. Indicator for compressor
5. ‘Water Full’ indicator
6. ‘Down’
button
7. Speed (ventilation) button
8. Mode (function) option button
9. Fan mode indicator
10. Cooling mode indicator
11. Automatic mode indicator
12. High ventilation indicator
13. Low ventilation indicator
14. Display window
15. Receiver for remote control
16. Timer operation indicator
Operating Instructions
On/Off
•
Press ON/OFF button, the unit will start in
AUTO
mode.
•
To turn the unit off, press ON/OFF button again.
•
Please note: The display window will show the ambient room temperature from 0
o
C to 50
o
C except
during setting on the timer-on or timer-off function.
Auto Mode
AUTO
mode selects the mode, either fan or cooling, that is suitable to the temperature of the room.
•
The unit will automatically start in
AUTO
mode or you can press
MODE
button to choose Auto mode.
•
If the ambient temperature is:
o
Higher than 23
o
C, the unit will work in cooling mode.
o
Higher than 20
o
C but below or equal to 23
o
C, the unit will work in fan mode.
•
AUTO
mode will choose the ventilation speed automatically.
Fan Mode
The Fan or ventilation mode “moves” the air allowing for the recycling of air much like a general fan.
•
Press
MODE
button to choose
FAN
mode.
•
Press
SPEED
button to select the fan speed, either low or high.
•
The temperature cannot be set.
8
