background image

4

Safety and Warranty

•  Cleaning and maintenance requires great concentration.

•  A regular check of the electric supply cord is necessary; a worn-out or damage cord should not be used.

•  If the machine has malfunctions, do not use it and do not repair it; please call the Omcan Service Center at 

1-800-465-0234.

•  The grill is used for cooking, heating, toasting, and to grill foodstuffs. Do not use the machine for other uses 

or for any products other than foodstuffs.

The manufacturer is not liable in the following cases:

1.  If the machine has been tampered or adjusted by non-authorized personnel;

2.  If some parts have been substituted with non original spare parts;

3.  If the instructions contained in this manual are not followed;

4.  If the machine surface is not cleaned with the right product.

SAFETY DEVICES

The electrical safety devices installed on the machine, described in this manual, complies with EC 73/23, 

89/336, 89/109. Even though the griller is provided with electrical and mechanical protections (when the 

machine is working and for maintenance and cleaning operations), there are still risks that cannot be 

eliminated completely. These risks are scalds caused by the loading and unloading of the product, or other kind 

of injuries due to the maintenance operations.

The unit complies with:

- UL 197, 8° edition

- NSF 4, 1991 edition

1 YEAR BENCH WARRANTY

WARNING:

The packaging components are classified as normal solid urban waste and can therefore be disposed of 

without difficulty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated 

waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Summary of Contents for SG101





















Reviews: