Omcan Santos 54, Instruction Manual

Page: 8 / 20

8
Operation
Maintenance
TAKE NOTE:
1. The appliance stops when the cup (1) or (2) is removed from its stand (8), however, a rotation movement
does persist for a few seconds due to motor inertia: do not allow the cup to be off center so as not to
damage the mixing head (3) or (4) and deflector (5).
2. Wait for the motor to stop before removing the cup completely and avoid splashes.
CLEANING
IMPORTANT:
• When cleaning, stop the appliance and unplug the appliance’s power cord (9).
• The appliance must not be cleaned with a water jet, pressurized water or immersed.
• If, during preparation or incorrect handling, food or splashes have got into the cup positioning area or on
the cup stand (8), you are advised to clean this area quickly with clean water and check the cup presence
detection finger (10) is working properly.
You are advised to clean the appliance as soon as you have finished using it. It will be easier to clean if you do
not wait until food has dried in the cup, on the mixing head or deflector.
All these parts:
• Stainless steel cup (1).
• Plastic cup (2).
• Mixing head (3).
• Mixing head (4).
• Deflector (5).
Must be cleaned with standard washing up liquid or in the dishwasher. Do not use abrasive products that could
damage the parts.
STORAGE
The stainless steel (1) and plastic cups (2) can be stacked for storage purposes.
MAINTENANCE
Before any servicing of the appliance, it is essential to unplug the appliance from the main supply (9).
This machine requires no particular maintenance because the bearings are lubricated for life. If any
intervention is necessary to replace parts subject to wear, such as the mixing heads, the deflector, electrical or
other components, please refer to the parts list.