Omcan RS-CN-0348, Instruction Manual, Page: 10 / 24

10
Maintenance
Troubleshooting
Keep the refrigerator clean and perform periodical maintenance as necessary. Always unplug the socket before
maintenance. Never use a damaged plug or loose socket in order to prevent from electric shock or short
circuit. Never flush the refrigerator. Never use alkali detergent, soap, gasoline, acetone or brush.
1. Clean outside:
Dip soft cloth in neutral detergent (tableware detergent) to clean the outside of the refrigerator and then
wipe it with dry soft cloth.
2. Clean inside:
Take rack out for cleaning with water. Use soft cloth to wipe the box.
3. Shut down refrigerator for a long time:
Take all food out and unplug the wall socket. Clean both inside and outside of the refrigerator thoroughly
and open the door for sufficient dry. The glass breaks easily. Keep the glass far from children.
4. Replacement of lamp in the light box:
If the LED lamp is damaged, it must be replaced by the manufacturer, or its service agent.
Operation
WARNING:
Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless
they are of the type recommended by the manufacturer.
CAUTION:
Risk of fire. The height of the triangle in the symbol should be at least 15mm.
ERROR CODES
Fault Code Causes Solutions
EE1 Open circuit or short
circuit of temperature
probe.
Check if the plug on mainboard is loosened or not, or
change temperature probe.
EE2 Open circuit or short
circuit of defrosting probe.
Check if the plug on mainboard is loosened or not, or
change defrosting probe.
EE3 Open circuit or short
circuit of overheating
probe.
Check if the plug on mainboard is loosened or not, or
change overheating probe.