Omcan RS-CN-0250, Instruction Manual

Page: 5 / 20

5
Technical Specifications
Model RS-CN-0250
Refrigerant and Injection (g) R134a (600g)
Rated Input power (W) 650
Power running of electrical heating element (W) 400
Max. ambient temp. /RH <28°C / 70%
Refrigeration temperature (°C) 2 - 10
Blowing Gas XPS
Type of Climate 6
Total effective volume (L) 250
Net weight (Kg) 128
Rated voltage (V) approx. 110
Rated Frequency (Hz) 60
Overall dimension (mm) (L × W × H) 680 × 610 × 1704
Rated Current (A) 10
Lamp power (W) 1.44*4 LED
Handling and Assembly
Handle with care
Unplug the wall socket first. Never tilt it over 45
degrees when handling.
Dry place
Always locate the refrigerator in a dry location.
Sufficient space
The distance from both sides and back of refrigerator
to wall or other substance must be no less than 10
cm. The refrigeration capability may decrease if its
surrounding space is too small to circulate air.
Well ventilated
Always locate the refrigerator in an area with good
ventilation. When using for the first time, wait for 24
hours after handling to start.
Far from heat source
Never place the refrigerator direction under sunlight.
Never locate it near any heat source to prevent
reducing refrigeration capability.
No heavy load
Never put any heavy objects on top of the
refrigerator.
Do not make holes
Never make any holes on the refrigerator. Do not
attach any objects onto the refrigerator.
Stable Location
Unpack and place the refrigerator on flat and stable
ground.
Exclusive power socket
Normally, the power supply should be 100 – 110V, 60
Hz single phase AC with exclusive single phase two
pin receptacle.
Do not share the socket
Never let the refrigerator share a socket with another
appliance. The cable may become hot and this may
cause a fire.