9
Installation
- Secure the ground fixer with nuts.
- Fix another two ground fixer with bolts and nuts, and reverse the base.
2. Assemble the tank housing.
- Secure the tank housing to the base using 4pcs screw M5X10.
3. Assemble the heating body.
- Secure the heating body to the tank housing using 4pcs screw M5X10.
4. Assemble the mesh.
- Secure the mesh to the Heating Body using 3pcs screw M5X10.
5. Assemble the upper protective mesh to the heating body directly.
6. Assemble the reflector.
- Screw 3pcs stud to the top of mesh, using 3pcs washerΦ6 to the bottom and 3pcs washerΦ6 to the top.
- Put the reflector on the stud and secure them using 3pcs wing nut and 3pcs washer.
7.
Screw gas hose and regulator to propane cylinder (not included). Do not cross-thread.
