Omcan PG-IT-0483-R, Instruction Manual

Page: 9 / 24

9
Operation
To load the product follow this procedure:
1. Place yourself in a correct position (see Figure 4), avoiding any contact with the machine.
2. Choose the correct temperature using the knob.
3. When the grill is hot, place the product and start the cooking.
4. At the end of the cooking, remove the food and residuals from the grill.
5. If the grill is inactive for a long period (one or two hours), place the knob to 0°C and unplug.
If the machine has been turned off longer than 30 min., allow at least 10 min. for it to reach cooking
temperature again. If you are not using the machine, but you think you are going to need it soon, set the
temperature at 120 F, this will allow the machine to reach cooking temperature faster.
Fig. 4: Proper
operation
position.
30 - 36”
76.2 - 91.44cm
Maintenance
• Cleaning the machine should be performed at least once a day and, if necessary more often.
• Never clean the machine by means of water jets, or submerge the machine.
• The cleaning of the grill can be performed when it is hot, scrape with a metallic brush on the cooking grid
several times.
ATTENTION:
Do not to touch the cooking surface because this could cause burns.