Omcan MS-IT-0330-A, Instruction Manual, Page: 5 / 28

5
Safety and Warranty
safety devices.
• Do not use the machine with improvised connections, or provisional or non insulated cables.
• Check the power cable and gland plate on the machine body regularly and, when necessary, have them
replaced by qualified personnel.
• In case of anomalies, defective operation, incorrect movement, and/or unusual noise, stop the machine
immediately.
• Before cleaning or servicing, disconnect the machine from the mains.
• Always use protection gloves during cleaning or maintenance.
• Lay or remove the goods to be sliced on the sliding plate only when the latter is completely pushed back
and the thickness control knob positioned to 0.
• To move the carriage tray when slicing, use the handle or the product grip handle.
• For extraordinary maintenance (to replace the sharpener wheels, the blade, etc), please contact the
manufacturer or qualified and duly authorized personnel.
• Avoid running the slicers with no product on it.
• The slicers are equipped with a ventilated motor. Extended continual use is not recommended. Let the
motor cool down after 30 minutes of use.
1 YEAR PARTS AND LABOR BENCH WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either
an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the
equipment.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see www.omcan.com/warranty.html for complete info.
WARNING:
The packaging components are classified as normal solid urban waste and can therefore be disposed of
without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!