5
Safety and Warranty
WARRANTY
The end user for no reason whatsoever is authorized to tamper with the appliance. If there are any problems
with the appliance, contact the manufacturer. Any attempt at dismantling, modifying or tampering with the
appliance or part of it will immediately null and void the warranty and the manufacturer will no longer be held
responsible for damage / injuries to persons or things caused by tampering. The manufacturer will not be held
responsible for the following conditions:
• Incorrect installation.
• Incorrect use of the appliance by untrained staff.
• Used not respecting the standards and laws in force of the country.
• Lack of or insufficient and incorrect maintenance.
• Use of non-original spare parts and non-specific parts for the various models.
• Total or partial non-observance of the instructions given.
This appliance is designed and manufactured for mixing meats for pre-packed food products. It is to be used in
industrial environments and by staff who have carefully read this manual before use. As this mixer is designed
for mixing meat there are no particular environmental requirements. However, it is advisable to locate this
appliance in closed environments protecting it from the weather and sudden changes in temperature. All the
models are provided with braking wheels. The machine is designed for NON-continuous use: after every work
cycle, we recommend leaving the machine to rest for a few minutes before using it again.
ATTENTION!
The size of the pieces to be mixed must be contained in the mixing drum, must not stick out over the rim and
must never exceed 396.8 lbs. / 180 kgs.
NON-PERMITTED USES
The mixer must only be used for the uses given by the manufacturer, and in particular:
• Do Not use the appliance for mixing food other than meat.
• Do Not use the appliance if it has not been correctly installed with all the protections correctly mounted
avoiding any hazardous risk of injury.
• Do Not use nor store the machine inside a cold room: this could seriously damage the electrical
components sensitive to condensate (which forms at low temperatures) and also alter the viscosity of
the grease and/or lubricating oil in the gearboxes and cogs inside it, jeopardizing the machine’s correct
operation and causing potential failures.
• Do Not touch any of the electrical parts without having first disconnected the appliance from the electricity
supply: there is risk of electrocution.
• Do Not mix quantities that cannot be contained in the mixing drum.
• Do Not wear clothing that does not conform with the accident prevention regulations.
Ask your employer regarding safety regulations and accident prevention clothing.
• Do Not turn on the appliance if faulty or out of service. Before using the appliance make sure any
hazardous working conditions have been eliminated. If there is a fault or problem with the appliance
immediately turn it off and inform the maintenance team.
• Do Not permit unauthorized staff to use the appliance. In case of an electrical accident the first thing to do
is to pull the injured worker away from the appliance (normally in this situation the worker is unconscious).
