5
Safety and Warranty
and any other conditions that may affect the operation. If any parts, the power cord or the grinder are
damaged, call the customer service number shown in this manual.
3.
Always unplug power cord from outlet when not in use, before putting on or taking off parts or accessories,
and before cleaning. After unplugging the unit, turn power switch ON, then OFF to ensure that all power
has been discharged from the grinder.
4.
This appliance is NOT intended for use by children or by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge. This appliance is not to be
used by children!
5. NEVER LEAVE GRINDER UNATTENDED WHILE IT IS RUNNING!
6. ALWAYS USE THE PROVIDED STOMPER, NEVER FEED FOOD BY HAND. KEEP FINGERS CLEAR OF
THE AUGER AND CUTTING BLADES AT ALL TIMES. NEVER REACH INTO THE GRINDER, doing so
may cause serious injury.
7. AVOID contact with moving parts. NEVER USE YOUR FINGERS TO SCRAPE FOOD AWAY FROM THE
CUTTING BLADE WHILE IT IS IN OPERATION. While the grinder is in operation. SEVERE INJURY MAY
RESULT.
8.
Wait until all moving parts have stopped and turn off power before removing any part from the grinder or
before switching the grinder in reverse.
9. TIE BACK loose hair, clothing, or any loose object and roll up long sleeves before operating the grinder.
10. REMOVE ties, rings, watches, bracelets, or other jewelry before operating the grinder.
11.
DO NOT operate grinder, or any other electrical equipment, with a damaged cord or plug or after the unit
malfunctions. DO NOT ATTEMPT TO REPLACE THE CORD. Call customer service to arrange to return
the grinder for examination, repair, or adjustment.
12. DO NOT use outdoors, this product is intended for INDOOR USE ONLY.
13. DO NOT let cord hang over the edge of a table or counter, come into contact with sharp edges, or touch
hot surfaces.
14. DO NOT let cord become kinked, trapped under unit or let it wind around the grinder.
15. DO NOT pull the power cord to disconnect.
16. DO NOT USE WITH EXTENSION CORD. Always plug directly into a grounded wall receptacle.
17.
This grinder uses a grounded, three prong plug (hot, neutral and ground), that should be connected directly
to a grounded 220 Volt, 50 Hz three prong grounded wall outlet receptacle. Grounded plugs are used on
metal- encased electric appliances in order to provide protection from an electric shock. DO NOT change or
alter the plug in any way. NEVER break off a grounding prong from a 3-conductor plug. Doing so voids the
warranty and can result in electric shock.
18.
Place the grinder on a firm and stable surface. Ensure that the grinder is not placed near the edge of the
worktop, where it can be easily pushed off or fall.
19. The gear housing and the motor cover may become HOT during operation. This is normal. DO NOT
TOUCH these parts while operating.
20. DO NOT attempt to operate the grinder if the grinder, motor and gear box are cold. Grinder, motor and gear
box temperature should be at least 45˚F (7˚C) before beginning.
21. To reduce the risk of unintentional starting, check that the control is OFF before plugging the cord into wall
outlet. To disconnect, turn the control to OFF, then remove plug from wall outlet.
22. DO NOT operate your grinder under a wall cabinet. When storing, always unplug the unit from the electrical
outlet. Not doing so could create a risk of fire, especially if the appliance touches the walls of the garage or
the door touches the unit as it closes.
23.
NEVER plug the grinder in where water may flood the area.
