Omcan IC-IT-0003, Instruction Manual

Page: 8 / 24

8
Operation
Maintenance
ice.
10. Do not leave ice inside the cup for a long time: it may homogenize and prevent the rotation of the blade,
causing serious damage to the machine.
ADJUSTING THE THICKNESS OF THE ICE
The procedure to adjust the thickness of the ice is the following:
1. Bring the switch to “0”.
2. Move the guillotine (FIG. n.1 - ref. 7) backward or forward to adjust the thickness.
3. Once you have set the desired thickness, you can start to use the ice breaker.
GENERAL INFORMATION
• The machine does not require special cleaning.
• The machine must be dried at the end of each working cycle.
• All parts of the machine must be cleaned using only a sponge or an absorbent cloth.
• The machine must not be cleaned using high-pressure cleaners or water jets. Do not use utensils, brushes
or other devices that may damage the surface of the machine.
WARNING!
Before performing any cleaning operations it is necessary to:
• Bring the switch to “0”.
• Disconnect the plug from the socket to isolate the machine completely from the rest of the system.
PROCEDURE TO FOLLOW TO CLEAN THE MACHINE
N.B. do not wash any part of the ice breaker in the dishwasher. Use the provided toothbrush to clean the
bottom of the blade (see FIG. n°9). Open the lid, insert the toothbrush in the cup and slide the bristles under
the blade. Once thoroughly cleaned, remove the toothbrush from the cup. The body of the machine and the
chute can be cleaned with mild detergent and a damp cloth rinsed frequently with warm water.
WARNING: once the ice breaker has been cleaned in all its parts, dry well and close the lid of the cup.
MAINTENANCE
GENERAL INFORMATION
Before performing any maintenance it is necessary to: disconnect the plug from the socket to isolate the
machine completely from the rest of the system.