8
Operation
To restart the machine it is necessary to:
1. Place the machine on its side; the overload switch is on the lower section.
2. Re-position the switch to 0.
3. Disconnect the machine from the main supply.
4. Remove the cause of the blockage.
5. Wait approximately 10 sec.
6. Push the push button to reactivate the motor protector.
7. Restart the machine.
Maintenance
CLEANING
The materials utilized, anodized aluminium, stainless steel and plastics have been selected with due regard
to hygiene regulations: “Rule CE n. 1935/2004 for the materials and things destined to come into contact with
food”.
WARNING:
disconnect machine from socket.
1.
Loosen both cylindrical loading filler screws.
2.
Lift cylindrical loading filler by tilting it slightly forward.
3.
Loosen both fixing screws.
4. Extract drain from screws.
5. Use a brush to clean crumbling powder and if necessary an aspirator.
Summary of Contents for GR-IT-0080
