6
Operation
Installation
The Nacho Warmer is a top loading appliance. Remove the easy to use plastic lid for filling. We suggest you
keep the warming unit at least 2/3 full for the most pleasing look. Refrain from pouring chips from bag or box to
avoid chip breakage and pouring in crushed chips and crumbs caused by manufacturing and shipping. Filling
is best accomplished by hand. We recommend you wash your hands with soap and water and use rubber food
safe gloves to handle chips. Gently transfer chips from bag or box to Nacho Warmer by cupping both hands
and scooping up chips and setting them into the unit. At least once a day turn unit off and allow 15 minutes
to cool, clean crumbs and broken chip from unit. Scrape crumbs across the holes located on floor of unit.
SHIPPER INSPECTION
Upon receiving this piece of equipment immediately inspect outer shipping container for damage. Report any
damage to outer box to carrier. Unpack the Nacho Warmer and inspect for damage. Report damage to carrier
and Omcan. Check box to ensure all pieces are included. Contact Omcan for any missing or damage pieces.
PROPER LOCATION
The Nacho Warmer is a freestanding design for use on a stable counter or table top. It should not be placed
in a built-in or recessed area. It should not be place on cloth or leather material. To ensure that your Nacho
Warmer works to the maximum efficiency it was designed for, keep it in a location where there is proper air
circulation and proper electrical outlets. Choose a location where the Nacho Warmer will be at least 10” away
from other equipment or walls and will not be exposed to direct sunlight. The Nacho Warmer is designed for
indoor use only. It should not be operated in a damp or wet environment. It should not be placed near sinks,
swimming pools, showers or hot tubs/jacuzzi. It is recommended that you allow 12” above the Nacho Warmer
for easy loading.
Technical Specifications
Model
DW-CN-0100
Chip Capacity
10 lbs. / 4.5 kgs.
Amps
1.3A
Power
160W
Electrical
120V / 60Hz / 1Ph
Dimensions
12.5” x 15.3” x 22.3” / 318 x 387 x 565mm
Weight
24 lbs. / 10.9 kgs.
Item Number
44674
