7
Operation
Maintenance
•
Connect the device to a single grounded power socket.
• Set the temperature as required for respective foods. You may adjust the desired temperature in the range
between 30°C-90°C.
•
The temperature inside of the hot display can be read from the front display.
•
Put the foods in appropriate containers before playing them inside the hot display and shut is by using the
sliding door.
•
Some of the device parts become very hot, always use safety gloves when placing or removing foods.
•
The foods are kept warm at the temperature set by you previously.
•
In order to place or remove foods. You may open the door at rear side.
• Switch on the inner light when required using the light switch of the device.
•
Disconnect the device from the power socket when the device is not in use.
•
Before beginning with repair or cleaning works make sure the device has been disconnected from the
power socket and has cooled sown.
•
Don’t use any acid agents and make sure no water ingresses the device.
•
To protected yourself from the electric shock, never immerse the device, its cables and the plug in water or
other liquids.
•
Don’t use any kind of pressure water jet for cleaning the device.
CLEANING
•
The device should be cleaned regularly.
•
Clean the device from the inside and outside with a soft, damp cloth and a mild cleaning agent.
•
Clean the placing grids and the housing with a soft, damp cloth and a mild cleaning agent.
• Clean the water bowl regularly. Calcifications at the water bowl may be removed with common agents or
liquids.
•
Only use a soft cloth and make sure you never use any kind of abrasive agents or pads which could
scratch the surface.
•
After the cleaning procedure, you should use a soft and dry cloth to wipe dry and polish the surface.
•
Make sure the device has been cleaned properly before storing it in a dry place.
MAINTENANCE
•
Check the mains lead from time to time to ensure it is not damaged in any way. Never use the device if the
lead is damaged. If the lead is damaged, it must be replaced by a qualified electrician.
• Only a qualified technician should carry out repairs and maintenance of the device, Do not attempt to repair
the device by yourself.
CAUTIONS
Children should be supervised to ensure that they do not play with the appliance.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
