7
Operation
milk-based drinks, follow the manufacturer’s instructions.
• Move Power Switch (8) to ON.
• Press the reduction motor button (6).
• Press the Bibita (Drinks) button (4) for cold drinks, or the Granita (Slurry) button (5) for slurries.
• Drink temperature or Slurry density may be raised or lowered by using buttons (1) or (2) accordingly. The
density reference or the temperature in degrees C may be read from the display.
• Cover lights are operated by button (7).
EQUIPMENT FUNCTIONS
KEYPAD LEGEND
1. Decrease slurry density.
Decrease drink temperature.
2. Increase slurry density.
Increase drink temperature.
3. Display:
Slurry function: 1- 3 - 5 - 7 - 9 indicates slurry density, indicates valve open.
Drinks function: 4°C - 9°C drink temperature,
H° drink temperature higher than 9°C, L° drink
temperature lower than 4°C
4. Cold drink function.
5. Slurry function.
6. Reduction motor (press ON/OFF).
7. Cover lights (press ON/OFF).
The machine memorizes the last selected settings
when switched off for any length of time. Raising
a cover will cause the relative container paddle to
stop and the display will go out to indicate a stopped
condition. The cover lights may be switched on or off
as required by using the appropriate button. If sugar
content is insufficient, or foreign bodies or blocks
of ice are detected in a container, a sensor will halt
paddle rotation so as not to overload the reduction
motor. The display will show an error symbol ( ).
Once the cause of the stoppage has been rectified,
replace the cover, press reduction motor button (6),
and either the drinks (4) or slurry (5) button, and the
machine will restart.